X-Git-Url: https://git.gag.com/?a=blobdiff_plain;f=tcl%2Ftarget%2Fomap2420.cfg;h=3e31bafc139bf257baaf1625c992d3c06f5dd2e2;hb=e6505b04892ccacf75603c3d173616f5d92809e7;hp=86b0a80db2eafa90e15705af2edf48b252a3ec8a;hpb=ecd709fa55333413f070939beadae98acac0e4c2;p=fw%2Fopenocd

diff --git a/tcl/target/omap2420.cfg b/tcl/target/omap2420.cfg
index 86b0a80db..3e31bafc1 100644
--- a/tcl/target/omap2420.cfg
+++ b/tcl/target/omap2420.cfg
@@ -1,24 +1,26 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+
 # Texas Instruments OMAP 2420
 #	http://www.ti.com/omap
 # as seen in Nokia N8x0 tablets
 
 if { [info exists CHIPNAME] } {
-   set  _CHIPNAME $CHIPNAME
+   set _CHIPNAME $CHIPNAME
 } else {
-   set  _CHIPNAME omap2420
+   set _CHIPNAME omap2420
 }
 
 # NOTE: likes slowish clock on reset (1.5 MBit/s or less) or use RCLK
 reset_config srst_nogate
 
-# Subsidiary TAP:  ARM7TDMIr4 plus imaging ... must add via ICEpick (addr 6).
+# Subsidiary TAP: ARM7TDMIr4 plus imaging ... must add via ICEpick (addr 6).
 jtag newtap $_CHIPNAME iva -irlen 4 -disable
 
 # Subsidiary TAP: C55x DSP ... must add via ICEpick (addr 2).
 jtag newtap $_CHIPNAME dsp -irlen 38 -disable
 
 # Subsidiary TAP: ARM ETB11, with scan chain for 4K of ETM trace buffer
-if { [info exists ETB_TAPID ] } {
+if { [info exists ETB_TAPID] } {
    set _ETB_TAPID $ETB_TAPID
 } else {
    set _ETB_TAPID 0x2b900f0f
@@ -26,7 +28,7 @@ if { [info exists ETB_TAPID ] } {
 jtag newtap $_CHIPNAME etb -irlen 4 -expected-id $_ETB_TAPID
 
 # Subsidiary TAP: ARM1136jf-s with scan chains for ARM Debug, EmbeddedICE-RT, ETM.
-if { [info exists CPU_TAPID ] } {
+if { [info exists CPU_TAPID] } {
    set _CPU_TAPID $CPU_TAPID
 } else {
    set _CPU_TAPID 0x07b3602f
@@ -34,18 +36,18 @@ if { [info exists CPU_TAPID ] } {
 jtag newtap $_CHIPNAME arm -irlen 5 -expected-id $_CPU_TAPID
 
 # Primary TAP: ICEpick-B (JTAG route controller) and boundary scan
-if { [info exists JRC_TAPID ] } {
+if { [info exists JRC_TAPID] } {
    set _JRC_TAPID $JRC_TAPID
 } else {
    set _JRC_TAPID 0x01ce4801
 }
 jtag newtap $_CHIPNAME jrc -irlen 2 -expected-id $_JRC_TAPID
 
-# GDB target:  the ARM.
+# GDB target: the ARM.
 set _TARGETNAME $_CHIPNAME.arm
 target create $_TARGETNAME arm11 -chain-position $_TARGETNAME
 
-# scratch:  framebuffer, may be initially unavailable in some chips
+# scratch: framebuffer, may be initially unavailable in some chips
 $_TARGETNAME configure -work-area-phys 0x40210000
 $_TARGETNAME configure -work-area-size 0x00081000
 $_TARGETNAME configure -work-area-backup 0