X-Git-Url: https://git.gag.com/?a=blobdiff_plain;f=tcl%2Ftarget%2Flpc2478.cfg;h=57aa36fd0121e454d18804c11ead9808aed615a6;hb=06df4664a928c5b6de78e6ccd28499a4589d80f8;hp=950ef63fd5ba8bdc3ff8f2b47b5a753ea3413892;hpb=b559b273b526b3077b3ca219eecc8df9f86efac0;p=fw%2Fopenocd

diff --git a/tcl/target/lpc2478.cfg b/tcl/target/lpc2478.cfg
index 950ef63fd..57aa36fd0 100644
--- a/tcl/target/lpc2478.cfg
+++ b/tcl/target/lpc2478.cfg
@@ -44,7 +44,7 @@ $_TARGETNAME configure -event reset-init {
 # After reset the chip uses its internal 4MHz RC oscillator.
 # flash bank lpc2000 <base> <size> 0 0 <target#> <variant> <clock> [calc checksum]
 set _FLASHNAME $_CHIPNAME.flash
-flash bank $_FLASHNAME lpc2000 0x0 0x7D000 0 0 $_TARGETNAME lpc2000_v2 12000 calc_checksum
+flash bank $_FLASHNAME lpc2000 0x0 0x7D000 0 0 $_TARGETNAME lpc2000_v2 4000 calc_checksum
 
 # Try to use RCLK, if RCLK is not available use "normal" mode. 4MHz / 6 = 666kHz, so use 500.
 jtag_rclk 500