X-Git-Url: https://git.gag.com/?a=blobdiff_plain;f=tcl%2Ftarget%2Flpc2378.cfg;h=21fdd1b4ade83f3ef24c6ec19b9f69e49814a567;hb=6839618062f07a12bd969da8dc54546f96938b67;hp=1a42e070337fd289fc96460547c39dca8fc1887e;hpb=b559b273b526b3077b3ca219eecc8df9f86efac0;p=fw%2Fopenocd

diff --git a/tcl/target/lpc2378.cfg b/tcl/target/lpc2378.cfg
index 1a42e0703..21fdd1b4a 100644
--- a/tcl/target/lpc2378.cfg
+++ b/tcl/target/lpc2378.cfg
@@ -6,12 +6,6 @@ if { [info exists CHIPNAME] } {
 	set  _CHIPNAME lpc2378
 }
 
-if { [info exists ENDIAN] } {
-	set  _ENDIAN $ENDIAN
-} else {
-	set  _ENDIAN little
-}
-
 if { [info exists CPUTAPID ] } {
 	set _CPUTAPID $CPUTAPID
 } else {
@@ -22,13 +16,12 @@ if { [info exists CPUTAPID ] } {
 adapter_nsrst_delay 200
 jtag_ntrst_delay 200
 
-# LPC2000 -> SRST causes TRST
-reset_config trst_and_srst srst_pulls_trst
+reset_config trst_and_srst
 
 jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
 
 set _TARGETNAME $_CHIPNAME.cpu
-target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm7tdmi-s_r4
+target create $_TARGETNAME arm7tdmi -chain-position $_TARGETNAME
 
 # LPC2378 has 32kB of SRAM on its main system bus (so-called Local On-Chip SRAM)
 $_TARGETNAME configure -work-area-phys 0x40000000 -work-area-size 0x8000 -work-area-backup 0
@@ -42,7 +35,7 @@ $_TARGETNAME configure -event reset-init {
 
 # LPC2378 has 512kB of FLASH, but upper 8kB are occupied by bootloader.
 # After reset the chip uses its internal 4MHz RC oscillator
-#flash bank lpc2000 <base> <size> 0 0 <target#> <variant>
+# flash bank <name> lpc2000 <base> <size> 0 0 <target#> <variant> <clock> [calc checksum]
 set _FLASHNAME $_CHIPNAME.flash
 flash bank $_FLASHNAME lpc2000 0x0 0x0007D000 0 0 $_TARGETNAME lpc2000_v2 4000 calc_checksum