X-Git-Url: https://git.gag.com/?a=blobdiff_plain;f=tcl%2Ftarget%2Flpc1xxx.cfg;h=70d26d2673900b06c6d5eef8e55b4542103e9e42;hb=e6505b04892ccacf75603c3d173616f5d92809e7;hp=701adf2782d40d4c9fe505bcb1af75e04a368107;hpb=2231da8ec4e7d7ae9b652f3dd1a7104f5a110f3f;p=fw%2Fopenocd

diff --git a/tcl/target/lpc1xxx.cfg b/tcl/target/lpc1xxx.cfg
index 701adf278..70d26d267 100644
--- a/tcl/target/lpc1xxx.cfg
+++ b/tcl/target/lpc1xxx.cfg
@@ -1,3 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+
 # Main file for NXP LPC1xxx/LPC40xx series Cortex-M0/0+/3/4F parts
 #
 # !!!!!!
@@ -99,10 +101,14 @@ $_TARGETNAME configure -work-area-phys 0x10000000 -work-area-size $_WORKAREASIZE
 # (same cmd51 destination boundary alignment, and all three support 256 byte
 # transfers).
 #
-# flash bank <name> lpc2000 <base> <size> 0 0 <target#> <variant> <clock> [calc checksum]
+# flash bank <name> lpc2000 <base> <size> 0 0 <target#> <variant> <clock> [calc checksum] [iap entry]
+set _IAP_ENTRY 0
+if { [info exists IAP_ENTRY] } {
+	set _IAP_ENTRY $IAP_ENTRY
+}
 set _FLASHNAME $_CHIPNAME.flash
 flash bank $_FLASHNAME lpc2000 0x0 0 0 0 $_TARGETNAME \
-	auto $_CCLK calc_checksum
+	auto $_CCLK calc_checksum $_IAP_ENTRY
 
 if { $_CHIPSERIES == "lpc800" || $_CHIPSERIES == "lpc1100" || $_CHIPSERIES == "lpc1200" || $_CHIPSERIES == "lpc1300" } {
 	# Do not remap 0x0000-0x0200 to anything but the flash (i.e. select
@@ -141,10 +147,10 @@ if { $_CHIPSERIES == "lpc800" || $_CHIPSERIES == "lpc1100" || $_CHIPSERIES == "l
 # Run with *real slow* clock by default since the
 # boot rom could have been playing with the PLL, so
 # we have no idea what clock the target is running at.
-adapter_khz 10
+adapter speed 10
 
 # delays on reset lines
-adapter_nsrst_delay 200
+adapter srst delay 200
 if {[using_jtag]} {
  jtag_ntrst_delay 200
 }