X-Git-Url: https://git.gag.com/?a=blobdiff_plain;f=tcl%2Ftarget%2Fimx53.cfg;h=84a85babbd900508d1881c4e119a9c0ab4f57774;hb=1c07229f8ca72e0f244e2289cefa28b65e21e774;hp=7194783e579eee86a876ff7b8d8a2a7dd237a99f;hpb=ca45e700b1c57caca2ef08e665e3c7e3e02ac8d3;p=fw%2Fopenocd diff --git a/tcl/target/imx53.cfg b/tcl/target/imx53.cfg index 7194783e5..84a85babb 100644 --- a/tcl/target/imx53.cfg +++ b/tcl/target/imx53.cfg @@ -13,11 +13,11 @@ if { [info exists DAP_TAPID] } { set _DAP_TAPID 0x1ba00477 } -jtag newtap $_CHIPNAME DAP -irlen 4 -ircapture 0x1 -irmask 0xf \ +jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf \ -expected-id $_DAP_TAPID # SDMA / no IDCODE -jtag newtap $_CHIPNAME SDMA -irlen 4 -ircapture 0x0 -irmask 0xf +jtag newtap $_CHIPNAME sdma -irlen 4 -ircapture 0x0 -irmask 0xf # SJC if { [info exists SJC_TAPID] } { @@ -26,26 +26,20 @@ if { [info exists SJC_TAPID] } { set _SJC_TAPID 0x0190d01d } -jtag newtap $_CHIPNAME SJC -irlen 5 -ircapture 0x1 -irmask 0x1f \ +jtag newtap $_CHIPNAME sjc -irlen 5 -ircapture 0x1 -irmask 0x1f \ -expected-id $_SJC_TAPID -ignore-version # GDB target: Cortex-A8, using DAP set _TARGETNAME $_CHIPNAME.cpu -target create $_TARGETNAME cortex_a8 -chain-position $_CHIPNAME.DAP +dap create $_CHIPNAME.dap -chain-position $_CHIPNAME.cpu +target create $_TARGETNAME cortex_a -dap $_CHIPNAME.dap # some TCK tycles are required to activate the DEBUG power domain -jtag configure $_CHIPNAME.SJC -event post-reset "runtest 100" - -# have the DAP "always" be active -jtag configure $_CHIPNAME.SJC -event setup "jtag tapenable $_CHIPNAME.DAP" +jtag configure $_CHIPNAME.sjc -event post-reset "runtest 100" proc imx53_dbginit {target} { - # General Cortex A8 debug initialisation - cortex_a8 dbginit + # General Cortex-A8 debug initialisation + cortex_a dbginit } -# Slow speed to be sure it will work -jtag_rclk 1000 -$_TARGETNAME configure -event "reset-start" { jtag_rclk 1000 } - $_TARGETNAME configure -event reset-assert-post "imx53_dbginit $_TARGETNAME"