X-Git-Url: https://git.gag.com/?a=blobdiff_plain;f=tcl%2Ftarget%2Fimx28.cfg;h=d52fc4eafb22c4905886e995b50a1bdaa4ae1ce8;hb=ce217538bc2b9c5ef6dc760b0b03d54602ed3be6;hp=0cbedce409855e099d226f531ec6def110ef8814;hpb=5d43ffd5bc0ca281314f5ccda417cc7144c31144;p=fw%2Fopenocd

diff --git a/tcl/target/imx28.cfg b/tcl/target/imx28.cfg
index 0cbedce40..d52fc4eaf 100644
--- a/tcl/target/imx28.cfg
+++ b/tcl/target/imx28.cfg
@@ -1,10 +1,12 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+
 # i.MX28 config file.
 # based off of the imx21.cfg file.
 
 reset_config trst_and_srst
 
 #jtag nTRST and nSRST delay
-adapter_nsrst_delay 100
+adapter srst delay 100
 jtag_ntrst_delay 100
 
 if { [info exists CHIPNAME] } {
@@ -23,7 +25,7 @@ if { [info exists ENDIAN] } {
 # Note above there is 1 tap
 
 # The CPU tap
-if { [info exists CPUTAPID ] } {
+if { [info exists CPUTAPID] } {
    set _CPUTAPID $CPUTAPID
 } else {
    set _CPUTAPID 0x079264f3
@@ -33,6 +35,6 @@ jtag newtap $_CHIPNAME cpu  -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_C
 
 # Create the GDB Target.
 set _TARGETNAME $_CHIPNAME.cpu
-target create $_TARGETNAME arm926ejs -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm926ejs
+target create $_TARGETNAME arm926ejs -endian $_ENDIAN -chain-position $_TARGETNAME
 
 arm7_9 dcc_downloads enable