X-Git-Url: https://git.gag.com/?a=blobdiff_plain;f=tcl%2Ftarget%2Fimx21.cfg;h=7c9cca35d4f30fb4ccd3ac8382936b926590b641;hb=3d61a9593e9f61e37dacff27c5dafc1fd452873d;hp=410bce8fc3a3641c6b6e113504648f5f51cadc3b;hpb=71af49ca7fb11b0bd0c1ba9578826f49288b68ef;p=fw%2Fopenocd

diff --git a/tcl/target/imx21.cfg b/tcl/target/imx21.cfg
index 410bce8fc..7c9cca35d 100644
--- a/tcl/target/imx21.cfg
+++ b/tcl/target/imx21.cfg
@@ -1,34 +1,36 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+
 #use combined on interfaces or targets that can't set TRST/SRST separately
 #
 # Hmmm.... should srst_pulls_trst be used here like i.MX27???
 reset_config trst_and_srst
 
 if { [info exists CHIPNAME] } {
-   set  _CHIPNAME $CHIPNAME
+   set _CHIPNAME $CHIPNAME
 } else {
-   set  _CHIPNAME imx21
+   set _CHIPNAME imx21
 }
 
 if { [info exists ENDIAN] } {
-   set  _ENDIAN $ENDIAN
+   set _ENDIAN $ENDIAN
 } else {
-   set  _ENDIAN little
+   set _ENDIAN little
 }
 
 
 # Note above there is 1 tap
 
 # The CPU tap
-if { [info exists CPUTAPID ] } {
+if { [info exists CPUTAPID] } {
    set _CPUTAPID $CPUTAPID
 } else {
    set _CPUTAPID 0x0792611f
 }
-jtag newtap $_CHIPNAME cpu  -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
+jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
 
 
 # Create the GDB Target.
 set _TARGETNAME $_CHIPNAME.cpu
-target create $_TARGETNAME arm926ejs -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm926ejs
+target create $_TARGETNAME arm926ejs -endian $_ENDIAN -chain-position $_TARGETNAME
 
 arm7_9 dcc_downloads enable