X-Git-Url: https://git.gag.com/?a=blobdiff_plain;f=tcl%2Ftarget%2Ffm3.cfg;h=0caf629da4a061e39c8d21d5d28c6cb3a0ab937d;hb=e6505b04892ccacf75603c3d173616f5d92809e7;hp=e2d78d1e5563b84e4090c54b7f87daa8864c2e0a;hpb=c7384117c66e8f18896ca09ab8095d6da16bb1e5;p=fw%2Fopenocd

diff --git a/tcl/target/fm3.cfg b/tcl/target/fm3.cfg
index e2d78d1e5..0caf629da 100644
--- a/tcl/target/fm3.cfg
+++ b/tcl/target/fm3.cfg
@@ -1,3 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+
 # MB9BF506
 # Fujitsu Cortex-M3 with 512kB Flash and 64kB RAM
 
@@ -22,29 +24,30 @@ if { [info exists CPUTAPID] } {
 }
 
 # delays on reset lines
-adapter_nsrst_delay 100
+adapter srst delay 100
 if {[using_jtag]} {
    jtag_ntrst_delay 100
 }
 
-# Fujitsu cortex-M3 reset configuration
+# Fujitsu Cortex-M3 reset configuration
 reset_config trst_only
 
 swj_newdap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
+dap create $_CHIPNAME.dap -chain-position $_CHIPNAME.cpu
 
 set _TARGETNAME $_CHIPNAME.cpu
-target create $_TARGETNAME cortex_m -endian $_ENDIAN -chain-position $_TARGETNAME
+target create $_TARGETNAME cortex_m -endian $_ENDIAN -dap $_CHIPNAME.dap
 
-# MB9BF506 has 64kB of SRAM on its main system bus 
+# MB9BF506 has 64kB of SRAM on its main system bus
 $_TARGETNAME configure -work-area-phys 0x1FFF8000 -work-area-size 0x10000 -work-area-backup 0
 
-# MB9BF506 has 512kB internal FLASH 
+# MB9BF506 has 512kB internal FLASH
 
 set _FLASHNAME $_CHIPNAME.flash
 flash bank $_FLASHNAME fm3 0 0 0 0 $_TARGETNAME
 
 # 4MHz / 6 = 666kHz, so use 500
-adapter_khz 500
+adapter speed 500
 
 if {![using_hla]} {
    # if srst is not fitted use SYSRESETREQ to