X-Git-Url: https://git.gag.com/?a=blobdiff_plain;f=tcl%2Ftarget%2Fepc9301.cfg;h=7e4599da8fc44d1d8ef0a08db35ff222c91097c2;hb=9d83df72dcbfc791b470b12949890df3f2d1508d;hp=6dbb91b37ba8eff3c34bd27386a2f5783fec1501;hpb=dbbc9c41f7db210b0a4e226540a28e0a8a5019bf;p=fw%2Fopenocd

diff --git a/tcl/target/epc9301.cfg b/tcl/target/epc9301.cfg
index 6dbb91b37..7e4599da8 100644
--- a/tcl/target/epc9301.cfg
+++ b/tcl/target/epc9301.cfg
@@ -1,14 +1,14 @@
 # Cirrus Logic EP9301 processor on an Olimex CS-E9301 board.
 
-if { [info exists CHIPNAME] } {	
-   set  _CHIPNAME $CHIPNAME    
-} else {	 
+if { [info exists CHIPNAME] } {
+   set  _CHIPNAME $CHIPNAME
+} else {
    set  _CHIPNAME ep9301
 }
 
-if { [info exists ENDIAN] } {	
-   set  _ENDIAN $ENDIAN    
-} else {	 
+if { [info exists ENDIAN] } {
+   set  _ENDIAN $ENDIAN
+} else {
    set  _ENDIAN little
 }
 
@@ -23,9 +23,10 @@ jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CP
 jtag_nsrst_delay 100
 jtag_ntrst_delay 100
 
-set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
-target create $_TARGETNAME arm920t -endian $_ENDIAN -chain-position $_TARGETNAME -work-area-virt 0 -work-area-phys 0x80014000 -work-area-size 0x1000 -work-area-backup 1
+set _TARGETNAME $_CHIPNAME.cpu
+target create $_TARGETNAME arm920t -endian $_ENDIAN -chain-position $_TARGETNAME -work-area-phys 0x80014000 -work-area-size 0x1000 -work-area-backup 1
 
 #flash configuration
 #flash bank <driver> <base> <size> <chip_width> <bus_width> [driver_options ...]
-flash bank cfi 0x60000000 0x1000000 2 2 0
+set _FLASHNAME $_CHIPNAME.flash
+flash bank $_FLASHNAME cfi 0x60000000 0x1000000 2 2 $_TARGETNAME