X-Git-Url: https://git.gag.com/?a=blobdiff_plain;f=tcl%2Ftarget%2Fepc9301.cfg;h=41021d522edc8ec794ea3b945a24410c286c0279;hb=d8307ed46037f4c7b5f4ce99991485bf08edce4e;hp=eaf4ee9676d61e32bf87606461e298449d2639af;hpb=3e6f9e8d1e65c4da505ff78481d54a115520d3d1;p=fw%2Fopenocd

diff --git a/tcl/target/epc9301.cfg b/tcl/target/epc9301.cfg
index eaf4ee967..41021d522 100644
--- a/tcl/target/epc9301.cfg
+++ b/tcl/target/epc9301.cfg
@@ -1,26 +1,28 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+
 # Cirrus Logic EP9301 processor on an Olimex CS-E9301 board.
 
 if { [info exists CHIPNAME] } {
-   set  _CHIPNAME $CHIPNAME
+   set _CHIPNAME $CHIPNAME
 } else {
-   set  _CHIPNAME ep9301
+   set _CHIPNAME ep9301
 }
 
 if { [info exists ENDIAN] } {
-   set  _ENDIAN $ENDIAN
+   set _ENDIAN $ENDIAN
 } else {
-   set  _ENDIAN little
+   set _ENDIAN little
 }
 
-if { [info exists CPUTAPID ] } {
+if { [info exists CPUTAPID] } {
    set _CPUTAPID $CPUTAPID
 } else {
-  # force an error till we get a good number
+   # Force an error until we get a good number.
    set _CPUTAPID 0xffffffff
 }
 
 jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
-jtag_nsrst_delay 100
+adapter srst delay 100
 jtag_ntrst_delay 100
 
 set _TARGETNAME $_CHIPNAME.cpu
@@ -28,4 +30,5 @@ target create $_TARGETNAME arm920t -endian $_ENDIAN -chain-position $_TARGETNAME
 
 #flash configuration
 #flash bank <driver> <base> <size> <chip_width> <bus_width> [driver_options ...]
-flash bank cfi 0x60000000 0x1000000 2 2 $_TARGETNAME
+set _FLASHNAME $_CHIPNAME.flash
+flash bank $_FLASHNAME cfi 0x60000000 0x1000000 2 2 $_TARGETNAME