X-Git-Url: https://git.gag.com/?a=blobdiff_plain;f=tcl%2Ftarget%2Fcs351x.cfg;h=e67540a8666814c9a5311603e16e2f374f8551f8;hb=e6505b04892ccacf75603c3d173616f5d92809e7;hp=243f96397598af1ad7ee7426812bcbbcede22c70;hpb=3e6f9e8d1e65c4da505ff78481d54a115520d3d1;p=fw%2Fopenocd

diff --git a/tcl/target/cs351x.cfg b/tcl/target/cs351x.cfg
index 243f96397..e67540a86 100644
--- a/tcl/target/cs351x.cfg
+++ b/tcl/target/cs351x.cfg
@@ -1,31 +1,32 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+
 if { [info exists CHIPNAME] } {
-   set  _CHIPNAME $CHIPNAME
+   set _CHIPNAME $CHIPNAME
 } else {
-   set  _CHIPNAME cs351x
+   set _CHIPNAME cs351x
 }
 
 if { [info exists ENDIAN] } {
-   set  _ENDIAN $ENDIAN
+   set _ENDIAN $ENDIAN
 } else {
-   set  _ENDIAN little
+   set _ENDIAN little
 }
 
-if { [info exists CPUTAPID ] } {
+if { [info exists CPUTAPID] } {
    set _CPUTAPID $CPUTAPID
 } else {
    set _CPUTAPID 0x00526fa1
 }
 
-jtag newtap $_CHIPNAME cpu  -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
+jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
 
 # Create the GDB Target.
 set _TARGETNAME $_CHIPNAME.cpu
-target create $_TARGETNAME fa526 -endian $_ENDIAN -chain-position $_TARGETNAME -variant fa526
+target create $_TARGETNAME fa526 -endian $_ENDIAN -chain-position $_TARGETNAME
 
 # There is 16K of SRAM on this chip
 # FIXME: flash programming is not working by using this work area. So comment this out for now.
-#$_TARGETNAME configure -work-area-phys 0x00000000 -work-area-size  0x4000 -work-area-backup 1
+#$_TARGETNAME configure -work-area-phys 0x00000000 -work-area-size 0x4000 -work-area-backup 1
 
 # This chip has a DCC ... use it
 arm7_9 dcc_downloads enable
-