X-Git-Url: https://git.gag.com/?a=blobdiff_plain;f=tcl%2Ftarget%2Fc100.cfg;h=5b4354e909147f4709522379b066aaa79880a5d1;hb=e5f515f990cc345fd3089a5520f39d5a128329bd;hp=0e72b29820dc89c6794b43b7ca42e3a940c4fb2d;hpb=ce89c7bf6588c7b2800c4ca453278b6f94795130;p=fw%2Fopenocd

diff --git a/tcl/target/c100.cfg b/tcl/target/c100.cfg
index 0e72b2982..5b4354e90 100644
--- a/tcl/target/c100.cfg
+++ b/tcl/target/c100.cfg
@@ -1,30 +1,29 @@
-# c100 config
-#
-#jtag_nsrst_delay 5000
-#jtag_ntrst_delay 3000
-#reset_config none
-reset_config trst_and_srst separate
-#reset_config srst_only srst_pulls_trst
+# c100 config.
+# This is ARM1136 dual core
+# this script only configures one core (that is used to run Linux)
 
-if { [info exists CHIPNAME] } {	
-   set  _CHIPNAME $CHIPNAME    
-} else {	 
-   set  _CHIPNAME c100
+# assume no PLL lock, start slowly
+adapter speed 100
+
+if { [info exists CHIPNAME] } {
+   set _CHIPNAME $CHIPNAME
+} else {
+   set _CHIPNAME c100
 }
 
-if { [info exists ENDIAN] } {	
-   set  _ENDIAN $ENDIAN    
-} else {	 
-   set  _ENDIAN little
+if { [info exists ENDIAN] } {
+   set _ENDIAN $ENDIAN
+} else {
+   set _ENDIAN little
 }
 
-if { [info exists CPUTAPID ] } {
+if { [info exists CPUTAPID] } {
    set _CPUTAPID $CPUTAPID
 } else {
    set _CPUTAPID 0x27b3645b
 }
 
-if { [info exists DSPTAPID ] } {
+if { [info exists DSPTAPID] } {
    set _DSPTAPID $DSPTAPID
 } else {
    set _DSPTAPID 0x27b3645b
@@ -41,25 +40,3 @@ target create $_TARGETNAME arm11 -endian $_ENDIAN -chain-position $_TARGETNAME
 
 # C100's ARAM 64k SRAM
 $_TARGETNAME configure -work-area-phys 0x0a000000 -work-area-size 0x10000 -work-area-backup 0
-
-
-proc power_restore {} { puts "Sensed power restore. No action." } 
-proc srst_deasserted {} { puts "Sensed nSRST deasserted. No action." }
-
-
-# issue telnet: reset init
-# issue gdb: monitor reset init
-$_TARGETNAME configure -event reset-init {
-	# Force target into ARM state.
-#	soft_reset_halt # not implemented on ARM11
-	puts "Halting C100.CPU"
-	halt
-}
-
-$_TARGETNAME configure -event reset-deassert-post {
-	# Force target into ARM state.
-#	soft_reset_halt # not implemented on ARM11
-	puts "Detected SRSRT asserted on C100.CPU"
-	
-}
-# Valid events: old-gdb_program_config, old-pre_resume, early-halted, halted, resumed, resume-start, resume-end, gdb-start, gdb-end, reset-start, reset-assert-pre, reset-assert-post, reset-deassert-pre, reset-deassert-post, reset-halt-pre, reset-halt-post, reset-wait-pre, reset-wait-post, reset-init, reset-end, examine-start, examine-end, debug-halted, debug-resumed, gdb-attach, gdb-detach, gdb-flash-write-start, gdb-flash-write-end, gdb-flash-erase-start, gdb-flash-erase-end, resume-start, resume-ok, or resume-end