X-Git-Url: https://git.gag.com/?a=blobdiff_plain;f=tcl%2Ftarget%2Fat91sam9260_ext_RAM_ext_flash.cfg;h=3e4b7d76b77946adfd723f7ce386ea09a2bdcc68;hb=9b32a06dad0aa6fc9c3896b21d3c32015487a090;hp=f7121ec9ab156e27a09db2c14bb195620c64aa46;hpb=ca45e700b1c57caca2ef08e665e3c7e3e02ac8d3;p=fw%2Fopenocd

diff --git a/tcl/target/at91sam9260_ext_RAM_ext_flash.cfg b/tcl/target/at91sam9260_ext_RAM_ext_flash.cfg
index f7121ec9a..3e4b7d76b 100644
--- a/tcl/target/at91sam9260_ext_RAM_ext_flash.cfg
+++ b/tcl/target/at91sam9260_ext_RAM_ext_flash.cfg
@@ -6,15 +6,15 @@ source [find target/at91sam9261.cfg]
 
 reset_config trst_and_srst
 
-jtag_rclk 4
+adapter speed 4
 
-adapter_nsrst_delay 200
+adapter srst delay 200
 jtag_ntrst_delay 200
 
 scan_chain
 $_TARGETNAME configure -event reset-start {
 	# at reset chip runs at 32khz
-	jtag_rclk 8
+	adapter speed 8
 }
 
 $_TARGETNAME configure -event reset-init {at91sam_init}
@@ -46,7 +46,7 @@ proc at91sam_init { } {
 	sleep 10                          ;# wait 10 ms
 
 	# Now run at anything fast... ie: 10mhz!
-	jtag_rclk 10000                    ;# Increase JTAG Speed to 6 MHz
+	adapter speed 10000               ;# Increase JTAG Speed to 6 MHz
 
 	mww 0xffffec00 0x0a0a0a0a         ;# SMC_SETUP0 : Setup SMC for Intel NOR Flash JS28F128P30T85 128MBit
 	mww 0xffffec04 0x0b0b0b0b         ;# SMC_PULSE0