X-Git-Url: https://git.gag.com/?a=blobdiff_plain;f=tcl%2Ftarget%2Fat91sam9260.cfg;h=df08d10d63d2ab7a727b8833c502b357814cfb48;hb=38e8d60f79fd51424c556e07653713254c2d9b4e;hp=7f6d2eb85d268f576335c2edeb53aeae3ab28cba;hpb=6336ebb05c2038feea4e249c0db0b60d98498722;p=fw%2Fopenocd

diff --git a/tcl/target/at91sam9260.cfg b/tcl/target/at91sam9260.cfg
index 7f6d2eb85..df08d10d6 100644
--- a/tcl/target/at91sam9260.cfg
+++ b/tcl/target/at91sam9260.cfg
@@ -2,15 +2,15 @@
 # Target:    Atmel AT91SAM9260
 ######################################
 
-if { [info exists CHIPNAME] } {	
-   set  _CHIPNAME $CHIPNAME    
-} else {	 
+if { [info exists CHIPNAME] } {
+   set  _CHIPNAME $CHIPNAME
+} else {
    set  _CHIPNAME at91sam9260
 }
 
-if { [info exists ENDIAN] } {	
-   set  _ENDIAN $ENDIAN    
-} else {	 
+if { [info exists ENDIAN] } {
+   set  _ENDIAN $ENDIAN
+} else {
    set  _ENDIAN little
 }
 
@@ -27,7 +27,7 @@ reset_config trst_and_srst separate trst_push_pull srst_open_drain
 jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
 
 jtag_nsrst_delay 300
-jtag_ntrst_delay 10
+jtag_ntrst_delay 200
 
 jtag_rclk 3
 
@@ -35,10 +35,10 @@ jtag_rclk 3
 # Target configuration
 ######################
 
-set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
+set _TARGETNAME $_CHIPNAME.cpu
 target create $_TARGETNAME arm926ejs -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm926ejs
 
 # Internal sram1 memory
-$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x00300000 -work-area-size 0x1000 -work-area-backup 1
+$_TARGETNAME configure -work-area-phys 0x00300000 -work-area-size 0x1000 -work-area-backup 1