X-Git-Url: https://git.gag.com/?a=blobdiff_plain;f=tcl%2Ftarget%2Fat91rm9200.cfg;h=3d9a8d9b5827d29df25f3ac9d1b0ad30a7f7e62b;hb=d1278660afcb3315fe74def3c2ca51cf28424963;hp=0e672ff3a63f16b5364098dd8c42a727e911f688;hpb=f92b104d8d9e50dc4257c79f4104273cf92dab38;p=fw%2Fopenocd

diff --git a/tcl/target/at91rm9200.cfg b/tcl/target/at91rm9200.cfg
index 0e672ff3a..3d9a8d9b5 100644
--- a/tcl/target/at91rm9200.cfg
+++ b/tcl/target/at91rm9200.cfg
@@ -1,21 +1,19 @@
 # Atmel AT91rm9200
 # http://atmel.com/products/at91/
 
-reset_config trst_and_srst
-
-if { [info exists CHIPNAME] } {	
-   set  _CHIPNAME $CHIPNAME    
-} else {	 
-   set  _CHIPNAME at91rm9200
+if { [info exists CHIPNAME] } {
+   set _CHIPNAME $CHIPNAME
+} else {
+   set _CHIPNAME at91rm9200
 }
 
-if { [info exists ENDIAN] } {	
-   set  _ENDIAN $ENDIAN    
-} else {	 
-   set  _ENDIAN little
+if { [info exists ENDIAN] } {
+   set _ENDIAN $ENDIAN
+} else {
+   set _ENDIAN little
 }
 
-if { [info exists CPUTAPID ] } {
+if { [info exists CPUTAPID] } {
    set _CPUTAPID $CPUTAPID
 } else {
    set _CPUTAPID 0x05b0203f
@@ -30,7 +28,7 @@ if { $_CPUTAPID == 0x15b0203f } {
    echo "- ERROR:                                              -"
    echo "- ERROR: In one position (0x05b0203f) it selects the  -"
    echo "- ERROR: ARM CPU, in the other position (0x1b0203f)   -"
-   echo "- ERROR: it selects boundry-scan not the ARM          -"
+   echo "- ERROR: it selects boundary-scan not the ARM         -"
    echo "- ERROR:                                              -"
    echo "-------------------------------------------------------"
 }
@@ -39,10 +37,10 @@ jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CP
 
 # Create the GDB Target.
 set _TARGETNAME $_CHIPNAME.cpu
-target create $_TARGETNAME arm920t -endian $_ENDIAN -chain-position $_TARGETNAME 
+target create $_TARGETNAME arm920t -endian $_ENDIAN -chain-position $_TARGETNAME
 
 # AT91RM9200 has a 16K block of sram @ 0x0020.0000
-$_TARGETNAME configure -work-area-virt 0x00200000 -work-area-phys 0x00200000 \
+$_TARGETNAME configure -work-area-phys 0x00200000 \
 		-work-area-size 0x4000 -work-area-backup 1
 
 # This chip has a DCC ... use it