X-Git-Url: https://git.gag.com/?a=blobdiff_plain;f=tcl%2Ftarget%2Faducm360.cfg;h=5cfb4830ca349dda38eb0d9c0c7297cb99c7a54e;hb=e6505b04892ccacf75603c3d173616f5d92809e7;hp=785c18c595e3ec31633d8bcabe8641bfe2e59f87;hpb=03f46e368830c7293f83186658268a6cd4557b20;p=fw%2Fopenocd

diff --git a/tcl/target/aducm360.cfg b/tcl/target/aducm360.cfg
old mode 100755
new mode 100644
index 785c18c59..5cfb4830c
--- a/tcl/target/aducm360.cfg
+++ b/tcl/target/aducm360.cfg
@@ -1,3 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+
 #
 # This file was created using as references the stm32f1x.cfg and aduc702x.cfg
 #
@@ -10,7 +12,7 @@ if { [info exists CHIPNAME] } {
    set _CHIPNAME aducm360
 }
 
-# Endianess
+# Endianness
 if { [info exists ENDIAN] } {
    set _ENDIAN $ENDIAN
 } else {
@@ -32,16 +34,17 @@ if { [info exists CPUTAPID] } {
    set _CPUTAPID 0x2ba01477
 }
 
-swd newdap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
+swj_newdap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
+dap create $_CHIPNAME.dap -chain-position $_CHIPNAME.cpu
 
 # SWD/JTAG speed
-adapter_khz 1000
+adapter speed 1000
 
 ##
 ## Target configuration
 ##
 set _TARGETNAME $_CHIPNAME.cpu
-target create $_TARGETNAME cortex_m -endian $_ENDIAN -chain-position $_TARGETNAME
+target create $_TARGETNAME cortex_m -endian $_ENDIAN -dap $_CHIPNAME.dap
 
 # allocate the working area
 $_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size $_WORKAREASIZE -work-area-backup 0
@@ -50,6 +53,6 @@ $_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size $_WORKAREASIZE
 set _FLASHNAME $_CHIPNAME.flash
 flash bank $_FLASHNAME aducm360 0x00 0 0 0 $_TARGETNAME
 
-adapter_nsrst_delay 100
+adapter srst delay 100
 
 cortex_m reset_config sysresetreq