X-Git-Url: https://git.gag.com/?a=blobdiff_plain;f=tcl%2Finterface%2Fbuspirate.cfg;h=8f613a764581c13d1a5fc4b41232a0b7daaa1bea;hb=386155419bfd9a47d896dfe23dbda19f8a4cf2d0;hp=9c7e0e70e18658ba03d9fb029d99c2589e460a30;hpb=24e1e3dd2699b817fa72a7843d36197abcd9e3a3;p=fw%2Fopenocd

diff --git a/tcl/interface/buspirate.cfg b/tcl/interface/buspirate.cfg
index 9c7e0e70e..8f613a764 100644
--- a/tcl/interface/buspirate.cfg
+++ b/tcl/interface/buspirate.cfg
@@ -1,26 +1,27 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+
 #
 # Buspirate with OpenOCD support
 #
 # http://dangerousprototypes.com/bus-pirate-manual/
 #
 
-interface buspirate
+adapter driver buspirate
 
 # you need to specify port on which BP lives
-#buspirate_port /dev/ttyUSB0
+#buspirate port /dev/ttyUSB0
 
 # communication speed setting
-buspirate_speed normal # or fast
+buspirate speed normal ;# or fast
 
 # voltage regulator Enabled = 1 Disabled = 0
-#buspirate_vreg 0
+#buspirate vreg 0
 
-# pin mode normal or open-drain
-#buspirate_mode normal
+# pin mode normal or open-drain (jtag only)
+#buspirate mode normal
 
 # pullup state Enabled = 1 Disabled = 0
-#buspirate_pullup 0
+#buspirate pullup 0
 
 # this depends on the cable, you are safe with this option
 reset_config srst_only
-