X-Git-Url: https://git.gag.com/?a=blobdiff_plain;f=tcl%2Fboard%2Ftopasa900.cfg;h=4fa63831bcc5a182815d7656c8fb82c3e3bb3d33;hb=d47aaf6d92788efc90c6d3379d58132e7ddfa781;hp=5984f81ffa960621d5da9f399499d69321a8f8d9;hpb=2dfa5e9c844a5a3f8aaca146c874f13570b8f667;p=fw%2Fopenocd

diff --git a/tcl/board/topasa900.cfg b/tcl/board/topasa900.cfg
index 5984f81ff..4fa63831b 100644
--- a/tcl/board/topasa900.cfg
+++ b/tcl/board/topasa900.cfg
@@ -37,7 +37,7 @@ proc topasa900_init { } {
 # Init SDRAM
 #  _PMCDRV          = 0x00000071;
 #  //
-#  // Initialize SDRAM timing paramater
+#  // Initialize SDRAM timing parameter
 #  //
 #  _DMC_CAS_LATENCY = 0x00000006;
 #  _DMC_T_DQSS      = 0x00000000;
@@ -105,7 +105,7 @@ proc topasa900_init { } {
 	mww 0xf4300004 0x00000000
 
 	sleep 10
-#	jtag_khz NNNN
+#	adapter speed NNNN
 
 # remap off in case of IROM boot
 	mww 0xf0000004 0x00000001
@@ -113,14 +113,13 @@ proc topasa900_init { } {
 }
 
 # comment the following out if usinf J-Link, it soes not support DCC
-arm7_9 dcc_downloads enable       # Enable faster DCC downloads
+arm7_9 dcc_downloads enable       ;# Enable faster DCC downloads
 
 
 #####################
 # Flash configuration
 #####################
 
-#flash bank cfi <base> <size> <chip width> <bus width> <target#>
+#flash bank <name> cfi <base> <size> <chip width> <bus width> <target>
 set _FLASHNAME $_CHIPNAME.flash
-flash bank $_FLASHNAME cfi 0x20000000 0x1000000 2 2 0
-
+flash bank $_FLASHNAME cfi 0x20000000 0x1000000 2 2 $_TARGETNAME