X-Git-Url: https://git.gag.com/?a=blobdiff_plain;f=tcl%2Fboard%2Ftopas910.cfg;h=f45f6e7eeab977afadb316e65efb2bc4295470dc;hb=4157732bd84c4e9e4b55357e1dc9a96078a35ee1;hp=450a75b8d2418fdda502ede79a522fef0858f753;hpb=43b38078787fd4f0753bdc3b150300d34678618a;p=fw%2Fopenocd

diff --git a/tcl/board/topas910.cfg b/tcl/board/topas910.cfg
index 450a75b8d..f45f6e7ee 100644
--- a/tcl/board/topas910.cfg
+++ b/tcl/board/topas910.cfg
@@ -1,3 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+
 ######################################
 # Target:    Toshiba TOPAS910 -- TMPA910 Starterkit
 #
@@ -30,7 +32,7 @@ proc topas910_init { } {
 # Init SDRAM
 #  _PMCDRV          = 0x00000071;
 #  //
-#  // Initialize SDRAM timing paramater
+#  // Initialize SDRAM timing parameter
 #  //
 #  _DMC_CAS_LATENCY = 0x00000006;
 #  _DMC_T_DQSS      = 0x00000000;
@@ -53,7 +55,7 @@ proc topas910_init { } {
 #  //
 #  // Configure SDRAM type parameter
 #  _DMC_MEMORY_CFG  = 0x00008011;
-#  _DMC_USER_CONFIG = 0x00000011;   
+#  _DMC_USER_CONFIG = 0x00000011;
 #  // 32 bit memory interface
 #
 #
@@ -99,20 +101,21 @@ proc topas910_init { } {
 	mww 0xf4300004 0x00000000
 
 	sleep 10
-#	jtag_speed 10000
+#	adapter speed NNNN
 
-# remap off in case of IROM boot 
+# remap off in case of IROM boot
 	mww 0xf0000004 0x00000001
 
 }
 
 # comment the following out if usinf J-Link, it soes not support DCC
-arm7_9 dcc_downloads enable       # Enable faster DCC downloads
+arm7_9 dcc_downloads enable       ;# Enable faster DCC downloads
 
 
 #####################
 # Flash configuration
 #####################
 
-#flash bank cfi <base> <size> <chip width> <bus width> <target#>
-flash bank cfi 0x20000000 0x2000000 2 2 0
+#flash bank <name> cfi <base> <size> <chip width> <bus width> <target>
+set _FLASHNAME $_CHIPNAME.flash
+flash bank $_FLASHNAME cfi 0x20000000 0x2000000 2 2 $_TARGETNAME