X-Git-Url: https://git.gag.com/?a=blobdiff_plain;f=tcl%2Fboard%2Ftopas910.cfg;h=9f994c8ea61ee7601381d4b9c4819165234c1a00;hb=d47aaf6d92788efc90c6d3379d58132e7ddfa781;hp=303fc7782d2edb16f3d5680e06cc52d0e001fa70;hpb=96f9790279f74f39b35fc3ad09340fd03123180c;p=fw%2Fopenocd

diff --git a/tcl/board/topas910.cfg b/tcl/board/topas910.cfg
index 303fc7782..9f994c8ea 100644
--- a/tcl/board/topas910.cfg
+++ b/tcl/board/topas910.cfg
@@ -30,7 +30,7 @@ proc topas910_init { } {
 # Init SDRAM
 #  _PMCDRV          = 0x00000071;
 #  //
-#  // Initialize SDRAM timing paramater
+#  // Initialize SDRAM timing parameter
 #  //
 #  _DMC_CAS_LATENCY = 0x00000006;
 #  _DMC_T_DQSS      = 0x00000000;
@@ -99,7 +99,7 @@ proc topas910_init { } {
 	mww 0xf4300004 0x00000000
 
 	sleep 10
-#	adapter_khz NNNN
+#	adapter speed NNNN
 
 # remap off in case of IROM boot
 	mww 0xf0000004 0x00000001
@@ -107,13 +107,13 @@ proc topas910_init { } {
 }
 
 # comment the following out if usinf J-Link, it soes not support DCC
-arm7_9 dcc_downloads enable       # Enable faster DCC downloads
+arm7_9 dcc_downloads enable       ;# Enable faster DCC downloads
 
 
 #####################
 # Flash configuration
 #####################
 
-#flash bank cfi <base> <size> <chip width> <bus width> <target#>
+#flash bank <name> cfi <base> <size> <chip width> <bus width> <target>
 set _FLASHNAME $_CHIPNAME.flash
-flash bank $_FLASHNAME cfi 0x20000000 0x2000000 2 2 0
+flash bank $_FLASHNAME cfi 0x20000000 0x2000000 2 2 $_TARGETNAME