X-Git-Url: https://git.gag.com/?a=blobdiff_plain;f=tcl%2Fboard%2Fti_tmdx570ls20susb.cfg;h=87cab2690747e3a64e282b6feb9810ddffc05789;hb=55d53fb64c900f1d196870cb39998b40e1e4ce0e;hp=2601d21dfa056aa8675326a5cd41f38d40313d36;hpb=7ca77b090bc43b0fb374e94b2a3767f3fc2a0bed;p=fw%2Fopenocd

diff --git a/tcl/board/ti_tmdx570ls20susb.cfg b/tcl/board/ti_tmdx570ls20susb.cfg
index 2601d21df..87cab2690 100644
--- a/tcl/board/ti_tmdx570ls20susb.cfg
+++ b/tcl/board/ti_tmdx570ls20susb.cfg
@@ -1,9 +1,16 @@
-adapter_khz 1500
+# TMS570 Microcontroller USB Kit
+# http://www.ti.com/tool/TMDX570LS20SUSB
 
+# Board uses a FT2232H to emulate an XDS100v2 JTAG debugger
+# TODO: board also supports an SCI UART on the 2232's B Bus
 source [find interface/ftdi/xds100v2.cfg]
 
-set DAP_TAPID 0x0b7b302f
-set JRC_TAPID $DAP_TAPID
-source [find target/ti_tms570.cfg]
+# Processor is TMS570LS20216
+source [find target/ti_tms570ls20xxx.cfg]
 
 reset_config trst_only
+
+# xds100v2 config says add this to the end
+init
+ftdi_set_signal PWR_RST 1
+jtag arp_init