X-Git-Url: https://git.gag.com/?a=blobdiff_plain;f=tcl%2Fboard%2Ftelo.cfg;h=05644f6587bcf9bc237eeb5e2e521f2061c37d88;hb=38ac08c1c25adf42cf20e48e10e6ddeab6a12d71;hp=126f388f2ad5eec26204b24ef235f548a8d35e0c;hpb=30da7c67cec8b315972377b5389735ff11f6042c;p=fw%2Fopenocd

diff --git a/tcl/board/telo.cfg b/tcl/board/telo.cfg
index 126f388f2..05644f658 100644
--- a/tcl/board/telo.cfg
+++ b/tcl/board/telo.cfg
@@ -8,15 +8,12 @@ source [find target/c100helper.tcl]
 
 
 # Telo board & C100 support trst and srst
-# Note that libftd2xx.so tries to assert srst
-# which break this script
-# use libftdi.so library instead with this script
 # make the reset asserted to
 # allow RC circuit to discharge for: [ms]
-adapter_nsrst_assert_width 100
+adapter srst pulse_width 100
 jtag_ntrst_assert_width 100
 # don't talk to JTAG after reset for: [ms]
-adapter_nsrst_delay 100
+adapter srst delay 100
 jtag_ntrst_delay 100
 reset_config trst_and_srst separate
 
@@ -26,11 +23,11 @@ reset_config trst_and_srst separate
 # issue telnet: reset init
 # issue gdb: monitor reset init
 $_TARGETNAME configure -event reset-init {
-	adapter_khz 100
+	adapter speed 100
 	# this will setup Telo board
 	setupTelo
 	#turn up the JTAG speed
-	adapter_khz 3000
+	adapter speed 3000
 	echo "JTAG speek now 3MHz"
 	echo "type helpC100 to get help on C100"
 }