X-Git-Url: https://git.gag.com/?a=blobdiff_plain;f=tcl%2Fboard%2Fstr910-eval.cfg;h=b6e9837720cff005c12b94e5a9c05e99d3bbfb62;hb=4157732bd84c4e9e4b55357e1dc9a96078a35ee1;hp=0cf794aecedde62ab568ede79808792a086986c1;hpb=2dfa5e9c844a5a3f8aaca146c874f13570b8f667;p=fw%2Fopenocd
diff --git a/tcl/board/str910-eval.cfg b/tcl/board/str910-eval.cfg
index 0cf794aec..b6e983772 100644
--- a/tcl/board/str910-eval.cfg
+++ b/tcl/board/str910-eval.cfg
@@ -1,8 +1,14 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+
# str910-eval eval board
#
# Need reset scripts
reset_config trst_and_srst
+# FIXME use some standard target config, maybe create one from this
+#
+# source [find target/...cfg]
+
if { [info exists CHIPNAME] } {
set _CHIPNAME $CHIPNAME
} else {
@@ -15,7 +21,7 @@ if { [info exists ENDIAN] } {
set _ENDIAN little
}
-if { [info exists FLASHTAPID ] } {
+if { [info exists FLASHTAPID] } {
set _FLASHTAPID $FLASHTAPID
} else {
set _FLASHTAPID 0x04570041
@@ -23,22 +29,22 @@ if { [info exists FLASHTAPID ] } {
jtag newtap $_CHIPNAME flash -irlen 8 -ircapture 0x1 -irmask 0x1 -expected-id $_FLASHTAPID
-if { [info exists CPUTAPID ] } {
+if { [info exists CPUTAPID] } {
set _CPUTAPID $CPUTAPID
} else {
set _CPUTAPID 0x25966041
}
jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
-if { [info exists BSTAPID ] } {
+if { [info exists BSTAPID] } {
set _BSTAPID $BSTAPID
} else {
set _BSTAPID 0x1457f041
}
jtag newtap $_CHIPNAME bs -irlen 5 -ircapture 0x1 -irmask 0x1 -expected-id $_BSTAPID
-set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
-target create $_TARGETNAME arm966e -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm966e
+set _TARGETNAME $_CHIPNAME.cpu
+target create $_TARGETNAME arm966e -endian $_ENDIAN -chain-position $_TARGETNAME
$_TARGETNAME configure -work-area-phys 0x50000000 -work-area-size 16384 -work-area-backup 1
$_TARGETNAME configure -event reset-init {
@@ -54,10 +60,7 @@ $_TARGETNAME configure -event reset-init {
}
#flash bank str9x 0 0
-set _FLASHNAME $_CHIPNAME.flash
+set _FLASHNAME $_CHIPNAME.flash0
flash bank $_FLASHNAME str9x 0x00000000 0x00080000 0 0 0
-set _FLASHNAME $_CHIPNAME.flash
+set _FLASHNAME $_CHIPNAME.flash1
flash bank $_FLASHNAME str9x 0x00080000 0x00008000 0 0 0
-
-# For more information about the configuration files, take a look at:
-# openocd.texi