X-Git-Url: https://git.gag.com/?a=blobdiff_plain;f=tcl%2Fboard%2Frsc-w910.cfg;h=cb1733b278d346754f1f6d6bf7f0e621f576497a;hb=38ac08c1c25adf42cf20e48e10e6ddeab6a12d71;hp=636a05399d0e7ccaba93993620bfb5ca51aa07dc;hpb=0d598535a30ea553f5a5d4a0047010807fcc5996;p=fw%2Fopenocd

diff --git a/tcl/board/rsc-w910.cfg b/tcl/board/rsc-w910.cfg
index 636a05399..cb1733b27 100644
--- a/tcl/board/rsc-w910.cfg
+++ b/tcl/board/rsc-w910.cfg
@@ -12,8 +12,8 @@ source [find target/nuc910.cfg]
 #
 reset_config trst_and_srst srst_pulls_trst
 
-adapter_khz 1000
-adapter_nsrst_delay 100
+adapter speed 1000
+adapter srst delay 100
 jtag_ntrst_delay 100
 
 $_TARGETNAME configure -work-area-phys 0x00000000 -work-area-size 0x04000000 -work-area-backup 0
@@ -28,7 +28,7 @@ nand device $_NANDNAME nuc910 $_TARGETNAME
 # Target events
 #
 
-$_TARGETNAME configure -event reset-start {adapter_khz 1000}
+$_TARGETNAME configure -event reset-start {adapter speed 1000}
 
 $_TARGETNAME configure -event reset-init {
 	# switch on PLL for 200MHz operation
@@ -47,7 +47,7 @@ $_TARGETNAME configure -event reset-init {
 	
 	arm7_9 dcc_downloads enable
 	arm7_9 fast_memory_access enable
-	adapter_khz 15000
+	adapter speed 15000
 	
 	# map nor flash to 0x20000000
 	# map sdram to 0x00000000