X-Git-Url: https://git.gag.com/?a=blobdiff_plain;f=tcl%2Fboard%2Fnxp_imx7sabre.cfg;h=9b0c743affc4e18fe61694f6f0c20abed4da07bb;hb=4157732bd84c4e9e4b55357e1dc9a96078a35ee1;hp=25b7b87817133534c6df09dd5ca742f2c09f6646;hpb=5c035e322f20a99679f626bb4b99c047b46d722f;p=fw%2Fopenocd

diff --git a/tcl/board/nxp_imx7sabre.cfg b/tcl/board/nxp_imx7sabre.cfg
index 25b7b8781..9b0c743af 100644
--- a/tcl/board/nxp_imx7sabre.cfg
+++ b/tcl/board/nxp_imx7sabre.cfg
@@ -1,14 +1,16 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+
 # NXP IMX7SABRE board
 # use on-board JTAG header
 transport select jtag
 
 # set a safe speed, can be overridden
-adapter_khz 1000
+adapter speed 1000
 
 # reset configuration has TRST and SRST support
 reset_config trst_and_srst srst_push_pull
 # need at least 100ms delay after SRST release for JTAG
-adapter_nsrst_delay 100
+adapter srst delay 100
 
 # source the target file
 source [find target/imx7.cfg]
@@ -27,7 +29,7 @@ proc imx7_uart_dbgconf { } {
 }
 
 proc check_bits_set_32 { addr mask } {
-    while { [expr [mrw $addr] & $mask == 0] } { }
+    while { [expr {[mrw $addr] & $mask} == 0] } { }
 }
 
 proc apply_dcd { } {