X-Git-Url: https://git.gag.com/?a=blobdiff_plain;f=tcl%2Fboard%2Fmini2440.cfg;h=790b4c7c8343f58652bd8ec1e2cd2abd543539c6;hb=4157732bd84c4e9e4b55357e1dc9a96078a35ee1;hp=9dca5a37c9cafd87d9b6fe1ec03d5878da07a7b1;hpb=38ac08c1c25adf42cf20e48e10e6ddeab6a12d71;p=fw%2Fopenocd

diff --git a/tcl/board/mini2440.cfg b/tcl/board/mini2440.cfg
index 9dca5a37c..790b4c7c8 100644
--- a/tcl/board/mini2440.cfg
+++ b/tcl/board/mini2440.cfg
@@ -1,3 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+
 #-------------------------------------------------------------------------
 # Mini2440 Samsung s3c2440A Processor with 64MB DRAM, 64MB NAND, 2 MB N0R
 # NOTE: Configured for NAND boot (switch S2 in NANDBOOT)
@@ -38,7 +40,7 @@
 #     it's apt-get install libusb-dev.  When I made my config I only included
 #     --enable-jlink and --enable-usbdevs
 #
-#     I HAVE NOT Tested this throughly, so there could still be problems.
+#     I HAVE NOT Tested this thoroughly, so there could still be problems.
 #     But it should get you way ahead of the game from where I started.
 #     If you find problems (and fixes) please post them to
 #     openocd-development@lists.berlios.de and join the developers and