X-Git-Url: https://git.gag.com/?a=blobdiff_plain;f=tcl%2Fboard%2Fkindle2.cfg;h=71dca741c9633c29765533e3caf62b04e7922e23;hb=5a0b4889d0d46639b38effd24102f0d5fca1ca31;hp=f32b2a321f20db5928e173401b91c449c84f8321;hpb=33281a87b66576057c14200e034e8e7e0a7e2d85;p=fw%2Fopenocd

diff --git a/tcl/board/kindle2.cfg b/tcl/board/kindle2.cfg
index f32b2a321..71dca741c 100644
--- a/tcl/board/kindle2.cfg
+++ b/tcl/board/kindle2.cfg
@@ -18,7 +18,7 @@ source [find target/imx31.cfg]
 source [find target/imx.cfg]
 
 $_TARGETNAME configure -event reset-init { kindle2_init }
-$_TARGETNAME configure -event reset-start { adapter_khz 1000 }
+$_TARGETNAME configure -event reset-start { adapter speed 1000 }
 
 # 8MiB NOR Flash
 set _FLASHNAME $_CHIPNAME.flash
@@ -36,8 +36,8 @@ jtag_ntrst_delay 30
 # this is broken but enabled by default
 arm11 memwrite burst disable
 
-adapter_khz 1000
-ftdi_tdo_sample_edge falling
+adapter speed 1000
+ftdi tdo_sample_edge falling
 
 proc kindle2_init {} {
 	imx3x_reset
@@ -162,7 +162,7 @@ proc kindle2_sdram_init {} {
 	# LPDDR1 Initialization script
 	mww 0xb8001010 0x00000002
 	mww 0xb8001010 0x00000004
-	# ESDCFG0: set timing paramters
+	# ESDCFG0: set timing parameters
 	mww 0xb8001004 0x007fff7f
 	# ESDCTL0: select Prechare-All mode
 	mww 0xb8001000 0x92100000