X-Git-Url: https://git.gag.com/?a=blobdiff_plain;f=tcl%2Fboard%2Fimx53loco.cfg;h=c4d45f0e323f0f41e33831d3227b253925599e71;hb=30bb4524de2b430d9c9ff005608fb5a2886fcd60;hp=e1bc44da3b3d4348c16aba6c6bc28815b67a7155;hpb=f5657aa76e795e4ed5b13a9f5df943181a123e49;p=fw%2Fopenocd

diff --git a/tcl/board/imx53loco.cfg b/tcl/board/imx53loco.cfg
index e1bc44da3..c4d45f0e3 100644
--- a/tcl/board/imx53loco.cfg
+++ b/tcl/board/imx53loco.cfg
@@ -19,7 +19,7 @@ adapter speed 3000
 jtag_rclk 1000
 $_TARGETNAME configure -event "reset-start" { jtag_rclk 1000 }
 
-#jtag_nsrst_delay 200
+#adapter srst delay 200
 #jtag_ntrst_delay 200
 
 $_TARGETNAME configure -event "reset-assert" {
@@ -70,7 +70,7 @@ proc init_l2cc { } {
 	set tR [arm mrc 15 0 1 0 1]
 	; #bic r0, r0, #0x2
 	; #mcr 15, 0, r0, c1, c0, 1
-	arm mcr 15 0 1 0 1 [expr $tR & ~(1<<2)]
+	arm mcr 15 0 1 0 1 [expr {$tR & ~(1 << 2)}]
 
 	; #/* reconfigure L2 cache aux control reg */
 	; #mov r0, #0xC0                   /* tag RAM */
@@ -140,7 +140,7 @@ proc init_clock { } {
 	mww [expr {$CCM_BASE_ADDR + $CLKCTL_CBCMR}] 0x00016154
 
 	; # change uart clk parent to pll2
-	mww [expr {$CCM_BASE_ADDR + $CLKCTL_CSCMR1}] [expr [mrw [expr {$CCM_BASE_ADDR + $CLKCTL_CSCMR1}]] & 0xfcffffff | 0x01000000]
+	mww [expr {$CCM_BASE_ADDR + $CLKCTL_CSCMR1}] [expr {[mrw [expr {$CCM_BASE_ADDR + $CLKCTL_CSCMR1}]] & 0xfcffffff | 0x01000000}]
 
 	; # make sure change is effective
 	while {[mrw [expr {$CCM_BASE_ADDR + $CLKCTL_CDHIPR}]] != 0} { sleep 1 }
@@ -158,7 +158,7 @@ proc init_clock { } {
 	mww [expr {$CCM_BASE_ADDR + $CLKCTL_CCSR}] 0x0
 
 	; # make uart div=6
-	mww [expr {$CCM_BASE_ADDR + $CLKCTL_CSCDR1}] [expr [mrw [expr {$CCM_BASE_ADDR + $CLKCTL_CSCDR1}]] & 0xffffffc0 | 0x0a]
+	mww [expr {$CCM_BASE_ADDR + $CLKCTL_CSCDR1}] [expr {[mrw [expr {$CCM_BASE_ADDR + $CLKCTL_CSCDR1}]] & 0xffffffc0 | 0x0a}]
 
 	; # Restore the default values in the Gate registers
 	mww [expr {$CCM_BASE_ADDR + 0x68}] 0xFFFFFFFF
@@ -244,7 +244,7 @@ proc setup_pll { PLL_ADDR CLK } {
 	mww [expr {$PLL_ADDR + $PLL_DP_HFS_MFN}] $DP_MFN
 
 	mww [expr {$PLL_ADDR + $PLL_DP_CTL}] 0x00001232
-	while {[expr [mrw [expr {$PLL_ADDR + $PLL_DP_CTL}]] & 0x1] == 0} { sleep 1 }
+	while {[expr {[mrw [expr {$PLL_ADDR + $PLL_DP_CTL}]] & 0x1}] == 0} { sleep 1 }
 }