X-Git-Url: https://git.gag.com/?a=blobdiff_plain;f=tcl%2Fboard%2Fhitex_str9-comstick.cfg;h=3b9225213df0903d3dcc0ac3b4e33d97b27b2fd7;hb=11598cb1be82dcca7995b2b7823a13435079da4f;hp=e7b79616c2fd1e8e8fdd84baeff640709bb4c1e1;hpb=3e6f9e8d1e65c4da505ff78481d54a115520d3d1;p=fw%2Fopenocd

diff --git a/tcl/board/hitex_str9-comstick.cfg b/tcl/board/hitex_str9-comstick.cfg
index e7b79616c..3b9225213 100644
--- a/tcl/board/hitex_str9-comstick.cfg
+++ b/tcl/board/hitex_str9-comstick.cfg
@@ -2,17 +2,22 @@
 # http://www.hitex.com/index.php?id=383
 # This works for the STR9-comStick revisions STR912CS-A1 and STR912CS-A2.
 
-source [find interface/hitex_str9-comstick.cfg]
+source [find interface/ftdi/hitex_str9-comstick.cfg]
 
 # set jtag speed
-jtag_khz 3000
+adapter speed 3000
 
-jtag_nsrst_delay 100
+adapter srst delay 100
 jtag_ntrst_delay 100
 #use combined on interfaces or targets that can't set TRST/SRST separately
 reset_config trst_and_srst
-#jtag scan chain
-#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
+
+#
+# FIXME use the standard str912 target config; that script might need
+# updating to "-ignore-version" for the boundary scan TAP
+#
+#	source [find target/str912.cfg]
+#
 
 if { [info exists CHIPNAME] } {
    set  _CHIPNAME $CHIPNAME
@@ -26,21 +31,21 @@ if { [info exists ENDIAN] } {
    set  _ENDIAN little
 }
 
-if { [info exists FLASHTAPID ] } {
+if { [info exists FLASHTAPID] } {
    set _FLASHTAPID $FLASHTAPID
 } else {
    set _FLASHTAPID 0x04570041
 }
 jtag newtap $_CHIPNAME flash -irlen 8 -ircapture 0x1 -irmask 0x1 -expected-id $_FLASHTAPID
 
-if { [info exists CPUTAPID ] } {
+if { [info exists CPUTAPID] } {
    set _CPUTAPID $CPUTAPID
 } else {
    set _CPUTAPID 0x25966041
 }
 jtag newtap $_CHIPNAME cpu   -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
 
-if { [info exists BSTAPID ] } {
+if { [info exists BSTAPID] } {
    set _BSTAPID $BSTAPID
 } else {
    # Found on STR9-comStick, revision STR912CS-A1
@@ -50,8 +55,8 @@ if { [info exists BSTAPID ] } {
 }
 jtag newtap $_CHIPNAME bs -irlen 5 -ircapture 0x1 -irmask 0x1 -expected-id $_BSTAPID1 -expected-id $_BSTAPID2
 
-set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
-target create $_TARGETNAME arm966e -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm966e
+set _TARGETNAME $_CHIPNAME.cpu
+target create $_TARGETNAME arm966e -endian $_ENDIAN -chain-position $_TARGETNAME
 
 $_TARGETNAME configure -event reset-init {
 	# We can increase speed now that we know the target is halted.
@@ -68,5 +73,7 @@ $_TARGETNAME configure -event reset-init {
 $_TARGETNAME configure -work-area-phys 0x50000000 -work-area-size 16384 -work-area-backup 0
 
 #flash bank <driver> <base> <size> <chip_width> <bus_width>
-flash bank str9x 0x00000000 0x00080000 0 0 0
-flash bank str9x 0x00080000 0x00008000 0 0 0
+set _FLASHNAME $_CHIPNAME.flash0
+flash bank $_FLASHNAME str9x 0x00000000 0x00080000 0 0 0
+set _FLASHNAME $_CHIPNAME.flash1
+flash bank $_FLASHNAME str9x 0x00080000 0x00008000 0 0 0