X-Git-Url: https://git.gag.com/?a=blobdiff_plain;f=tcl%2Fboard%2Fethernut3.cfg;h=384db1d232eb46966db7e83e7ecbb16840fc5fea;hb=ace028262ba0bda0e921afb11e6eb7d87708d889;hp=34e9b72d683ac4b1a951d0da0469163c7f766a6b;hpb=b559b273b526b3077b3ca219eecc8df9f86efac0;p=fw%2Fopenocd

diff --git a/tcl/board/ethernut3.cfg b/tcl/board/ethernut3.cfg
index 34e9b72d6..384db1d23 100644
--- a/tcl/board/ethernut3.cfg
+++ b/tcl/board/ethernut3.cfg
@@ -1,3 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+
 #
 # Ethernut 3 board configuration file
 #
@@ -20,13 +22,13 @@ flash bank $_FLASHNAME cfi 0x10000000 0x400000 2 2 $_TARGETNAME
 # Micrel MIC2775-29YM5 Supervisor
 # Reset output will remain active for 280ms (maximum)
 #
-adapter_nsrst_delay 300
+adapter srst delay 300
 jtag_ntrst_delay 300
 
 
 arm7_9 fast_memory_access enable
 arm7_9 dcc_downloads enable
-adapter_khz 16000
+adapter speed 16000
 
 
 # Target events
@@ -77,10 +79,10 @@ proc board_remap {{VERBOSE 0}} {
 	mww 0xffe00020 0x00000001
 
 	if {$VERBOSE != 0} {
-		puts "0x00000000 RAM"
-		puts "0x10000000 Flash"
-		puts "0x20000000 Ethernet"
-		puts "0x21000000 CPLD"
-		puts "0x22000000 Expansion"
+		echo "0x00000000 RAM"
+		echo "0x10000000 Flash"
+		echo "0x20000000 Ethernet"
+		echo "0x21000000 CPLD"
+		echo "0x22000000 Expansion"
 	}
 }