X-Git-Url: https://git.gag.com/?a=blobdiff_plain;f=tcl%2Fboard%2Fesp32s2-kaluga-1.cfg;fp=tcl%2Fboard%2Fesp32s2-kaluga-1.cfg;h=783ea214b479f55621c34e89c0f8eedef5ffa809;hb=78c87f5e81f8b3ee2a72aa546f87985596cb2b9f;hp=0000000000000000000000000000000000000000;hpb=b470b664ca7ba3f21684848c3819d696fb3c890a;p=fw%2Fopenocd

diff --git a/tcl/board/esp32s2-kaluga-1.cfg b/tcl/board/esp32s2-kaluga-1.cfg
new file mode 100644
index 000000000..783ea214b
--- /dev/null
+++ b/tcl/board/esp32s2-kaluga-1.cfg
@@ -0,0 +1,18 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+#
+# Example OpenOCD configuration file for ESP32-S2 Kaluga board.
+#
+# For example, OpenOCD can be started for ESP32-S2 debugging on
+#
+#   openocd -f board/esp32s2-kaluga-1.cfg
+#
+
+source [find interface/ftdi/esp32s2_kaluga_v1.cfg]
+source [find target/esp32s2.cfg]
+
+# The speed of the JTAG interface, in kHz. If you get DSR/DIR errors (and they
+# do not relate to OpenOCD trying to read from a memory range without physical
+# memory being present there), you can try lowering this.
+# On ESP32-S2, this can go as high as 20MHz if CPU frequency is 80MHz, or 26MHz
+# if CPU frequency is 160MHz or 240MHz.
+adapter speed 20000