X-Git-Url: https://git.gag.com/?a=blobdiff_plain;f=tcl%2Fboard%2Fembedded-artists_lpc2478-32.cfg;h=38f5e1b8eb3d1077c39e7d6aabd58eda8c9aa6ea;hb=64d89d5ee1a554fbae8eb0a7231ccb2dc4428c1a;hp=abf0a5f2272ffc0f24ab7931f5f1965e314f927f;hpb=f855fdcf0d95ff9ba18a83f9a97d5368844d4f2c;p=fw%2Fopenocd

diff --git a/tcl/board/embedded-artists_lpc2478-32.cfg b/tcl/board/embedded-artists_lpc2478-32.cfg
index abf0a5f22..38f5e1b8e 100644
--- a/tcl/board/embedded-artists_lpc2478-32.cfg
+++ b/tcl/board/embedded-artists_lpc2478-32.cfg
@@ -125,7 +125,7 @@ proc init_board {} {
 #
 proc enable_pll {} {
     # Disconnect PLL in case it is already connected
-    if {[expr [read_register 0xE01FC080] & 0x03] == 3} {
+    if {[expr {[read_register 0xE01FC080] & 0x03}] == 3} {
         # Disconnect it, but leave it enabled
         # (This MUST be done in two steps)
         mww 0xE01FC080 0x00000001       ;# PLLCON: disconnect PLL