X-Git-Url: https://git.gag.com/?a=blobdiff_plain;f=tcl%2Fboard%2Fek-lm3s811.cfg;h=d7fe243e64ab9a14233ebc4931b2e453751023e6;hb=77287b8d47b4be8ee5612037fe1eba6f0e08147f;hp=078cae1fb453ae9ba0c612e7f3799b3ff58882f1;hpb=96f9790279f74f39b35fc3ad09340fd03123180c;p=fw%2Fopenocd

diff --git a/tcl/board/ek-lm3s811.cfg b/tcl/board/ek-lm3s811.cfg
index 078cae1fb..d7fe243e6 100644
--- a/tcl/board/ek-lm3s811.cfg
+++ b/tcl/board/ek-lm3s811.cfg
@@ -1,18 +1,15 @@
 #
 # TI/Luminary Stellaris LM3S811 Evaluation Kits
 #
-# http://www.luminarymicro.com/products/stellaris_811_evaluation_kits.html
+# http://www.ti.com/tool/ek-lm3s811
+#
 
-# include the FT2232 interface config for on-board JTAG interface
-source [find interface/luminary.cfg]
+# NOTE:  using the on-board FT2232 JTAG/SWD/SWO interface is optional!
+# so is using it in JTAG mode, as done here.
+# NOTE:  older '811-EK boards (before rev C) shouldn't use this.
+source [find interface/ftdi/luminary.cfg]
 
 # include the target config
-source [find target/lm3s811.cfg]
-
-# jtag speed
-adapter_khz 500
-
-jtag_nsrst_delay 100
-
-#LM3S811 Evaluation Board has only srst
-reset_config srst_only
+set WORKAREASIZE 0x2000
+set CHIPNAME lm3s811
+source [find target/stellaris.cfg]