X-Git-Url: https://git.gag.com/?a=blobdiff_plain;f=tcl%2Fboard%2Fek-lm3s1968.cfg;h=c794a17a01c5861047224906dc9ef3b423103455;hb=4157732bd84c4e9e4b55357e1dc9a96078a35ee1;hp=6ce7f7fad4c7bf68b9c13eee667edf3322abe1da;hpb=96f9790279f74f39b35fc3ad09340fd03123180c;p=fw%2Fopenocd

diff --git a/tcl/board/ek-lm3s1968.cfg b/tcl/board/ek-lm3s1968.cfg
index 6ce7f7fad..c794a17a0 100644
--- a/tcl/board/ek-lm3s1968.cfg
+++ b/tcl/board/ek-lm3s1968.cfg
@@ -1,22 +1,21 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+
 #
 # TI/Luminary Stellaris LM3S1968 Evaluation Kits
 #
-# http://www.luminarymicro.com/products/lm3s1968_evaluation_kits.html
+# http://www.ti.com/tool/ek-lm3s1968
+#
 
 # NOTE:  to use J-Link instead of the on-board interface,
-# you may also need to reduce adapter_khz to be about 1200.
+# you may also need to reduce adapter speed to be about 1200.
 # source [find interface/jlink.cfg]
 
 # include the FT2232 interface config for on-board JTAG interface
-source [find interface/luminary.cfg]
+# NOTE:  using the on-board FT2232 JTAG/SWD/SWO interface is optional!
+# so is using in JTAG mode, as done here.
+source [find interface/ftdi/luminary.cfg]
 
 # include the target config
-source [find target/lm3s1968.cfg]
-
-# jtag speed
-adapter_khz 3000
-
-jtag_nsrst_delay 100
-
-#LM3S1968 Evaluation Board has only srst
-reset_config srst_only
+set WORKAREASIZE 0x2000
+set CHIPNAME lm3s1968
+source [find target/stellaris.cfg]