X-Git-Url: https://git.gag.com/?a=blobdiff_plain;f=tcl%2Fboard%2Fek-lm3s1968.cfg;h=bbb04baa612b51d8bb760e199b45fcbeaa8342ab;hb=3359419e6a121e73361c74fcae08999aa85330da;hp=42f100feeb4cc436e41586c3c7b205da028b986e;hpb=8cbcd56c0e1b809f39e1f4088a01f05d51d7ca85;p=fw%2Fopenocd

diff --git a/tcl/board/ek-lm3s1968.cfg b/tcl/board/ek-lm3s1968.cfg
index 42f100fee..bbb04baa6 100644
--- a/tcl/board/ek-lm3s1968.cfg
+++ b/tcl/board/ek-lm3s1968.cfg
@@ -5,13 +5,13 @@
 #
 
 # NOTE:  to use J-Link instead of the on-board interface,
-# you may also need to reduce adapter_khz to be about 1200.
+# you may also need to reduce adapter speed to be about 1200.
 # source [find interface/jlink.cfg]
 
 # include the FT2232 interface config for on-board JTAG interface
 # NOTE:  using the on-board FT2232 JTAG/SWD/SWO interface is optional!
 # so is using in JTAG mode, as done here.
-source [find interface/luminary.cfg]
+source [find interface/ftdi/luminary.cfg]
 
 # include the target config
 set WORKAREASIZE 0x2000