X-Git-Url: https://git.gag.com/?a=blobdiff_plain;f=tcl%2Fboard%2Fek-lm3s1968.cfg;h=bbb04baa612b51d8bb760e199b45fcbeaa8342ab;hb=248161cbf47af9f7fc8c00b5efa79a1ff8e65848;hp=cb83a3aa951d93ced3685cb575b137b6bffd8f25;hpb=962946ea89fd948ab8c147134f06caa89b31e244;p=fw%2Fopenocd

diff --git a/tcl/board/ek-lm3s1968.cfg b/tcl/board/ek-lm3s1968.cfg
index cb83a3aa9..bbb04baa6 100644
--- a/tcl/board/ek-lm3s1968.cfg
+++ b/tcl/board/ek-lm3s1968.cfg
@@ -1,24 +1,19 @@
 #
 # TI/Luminary Stellaris LM3S1968 Evaluation Kits
 #
-# http://www.luminarymicro.com/products/lm3s1968_evaluation_kits.html
+# http://www.ti.com/tool/ek-lm3s1968
+#
 
 # NOTE:  to use J-Link instead of the on-board interface,
-# you may also need to reduce adapter_khz to be about 1200.
+# you may also need to reduce adapter speed to be about 1200.
 # source [find interface/jlink.cfg]
 
 # include the FT2232 interface config for on-board JTAG interface
 # NOTE:  using the on-board FT2232 JTAG/SWD/SWO interface is optional!
 # so is using in JTAG mode, as done here.
-source [find interface/luminary.cfg]
+source [find interface/ftdi/luminary.cfg]
 
 # include the target config
-source [find target/lm3s1968.cfg]
-
-# jtag speed
-adapter_khz 3000
-
-adapter_nsrst_delay 100
-
-#LM3S1968 Evaluation Board has only srst
-reset_config srst_only
+set WORKAREASIZE 0x2000
+set CHIPNAME lm3s1968
+source [find target/stellaris.cfg]