X-Git-Url: https://git.gag.com/?a=blobdiff_plain;f=tcl%2Fboard%2Fdptechnics_dpt-board-v1.cfg;h=3ab2c684de5ff37618496699d7c667147fffab9d;hb=5ffc745ea39393d2fc2772bf11e996e237463004;hp=de31c7c090a023eb77dd419e16759fb8fab9436e;hpb=c1b8824d1936bd13a3edc11784e3f872ca3255db;p=fw%2Fopenocd

diff --git a/tcl/board/dptechnics_dpt-board-v1.cfg b/tcl/board/dptechnics_dpt-board-v1.cfg
index de31c7c09..3ab2c684d 100644
--- a/tcl/board/dptechnics_dpt-board-v1.cfg
+++ b/tcl/board/dptechnics_dpt-board-v1.cfg
@@ -1,3 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+
 # Product page:
 # https://www.dptechnics.com/en/products/dpt-board-v1.html
 #
@@ -29,4 +31,4 @@ $_TARGETNAME configure -event reset-init {
 set ram_boot_address 0xa0000000
 $_TARGETNAME configure -work-area-phys 0xa1FFE000 -work-area-size 0x1000
 
-flash bank flash0 ath79 0 0 0 0 $_TARGETNAME cs0
+flash bank flash0 ath79 0xbf000000 0 0 0 $_TARGETNAME cs0