X-Git-Url: https://git.gag.com/?a=blobdiff_plain;f=tcl%2Fboard%2Fat91rm9200-ek.cfg;h=e38914e46ab5c9dc2615895c162ccac07a9d2973;hb=4157732bd84c4e9e4b55357e1dc9a96078a35ee1;hp=07a006b0c5fc3cbbef4da3d2044edc915b568129;hpb=f26cd967406d98e3cccf61b314e3eb544241364b;p=fw%2Fopenocd

diff --git a/tcl/board/at91rm9200-ek.cfg b/tcl/board/at91rm9200-ek.cfg
index 07a006b0c..e38914e46 100644
--- a/tcl/board/at91rm9200-ek.cfg
+++ b/tcl/board/at91rm9200-ek.cfg
@@ -1,3 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+
 #
 # Copyright 2010 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
 #
@@ -18,11 +20,13 @@ $_TARGETNAME configure -event reset-init { at91rm9200_ek_init }
 set _FLASHNAME $_CHIPNAME.flash
 flash bank $_FLASHNAME cfi 0x10000000 0x00800000 2 2 $_TARGETNAME
 
+# The chip may run @ 32khz, so set a really low JTAG speed
+adapter speed 8
 
 proc at91rm9200_ek_init { } {
 	# Try to run at 1khz... Yea, that slow!
 	# Chip is really running @ 32khz
-	adapter_khz 8
+	adapter speed 8
 
 	mww 0xfffffc64 0xffffffff
 	## disable all clocks but system clock
@@ -59,7 +63,7 @@ proc at91rm9200_ek_init { } {
 	#========================================
 	# CPU now runs at 180mhz
 	# SYS runs at 60mhz.
-	adapter_khz 40000
+	adapter speed 40000
 	#========================================
 
 	## Init SDRAM