X-Git-Url: https://git.gag.com/?a=blobdiff_plain;f=tcl%2Fboard%2Fat91rm9200-ek.cfg;h=958bc9d5189510660105920031288d6543064d3f;hb=e609d5a5de84b3daf8b9524143e41a6c0713fd8f;hp=a3f253a26c602edbcfa17ca36b2537e05fd9d7ea;hpb=2889471b5807449a69611ddbc4750d10c5514b86;p=fw%2Fopenocd

diff --git a/tcl/board/at91rm9200-ek.cfg b/tcl/board/at91rm9200-ek.cfg
index a3f253a26..958bc9d51 100644
--- a/tcl/board/at91rm9200-ek.cfg
+++ b/tcl/board/at91rm9200-ek.cfg
@@ -19,12 +19,12 @@ set _FLASHNAME $_CHIPNAME.flash
 flash bank $_FLASHNAME cfi 0x10000000 0x00800000 2 2 $_TARGETNAME
 
 # The chip may run @ 32khz, so set a really low JTAG speed
-adapter_khz 8
+adapter speed 8
 
 proc at91rm9200_ek_init { } {
 	# Try to run at 1khz... Yea, that slow!
 	# Chip is really running @ 32khz
-	adapter_khz 8
+	adapter speed 8
 
 	mww 0xfffffc64 0xffffffff
 	## disable all clocks but system clock
@@ -61,7 +61,7 @@ proc at91rm9200_ek_init { } {
 	#========================================
 	# CPU now runs at 180mhz
 	# SYS runs at 60mhz.
-	adapter_khz 40000
+	adapter speed 40000
 	#========================================
 
 	## Init SDRAM