X-Git-Url: https://git.gag.com/?a=blobdiff_plain;f=tcl%2Fboard%2Fat91eb40a.cfg;h=d314e181de14c3877a8b85fd3f22b9a8922ed6a1;hb=77287b8d47b4be8ee5612037fe1eba6f0e08147f;hp=40f2e123fc6bd2a4c157175405ae79f732c113c4;hpb=4a2f4e34336dbb662a308e5a881edbba9f3657ec;p=fw%2Fopenocd

diff --git a/tcl/board/at91eb40a.cfg b/tcl/board/at91eb40a.cfg
index 40f2e123f..d314e181d 100644
--- a/tcl/board/at91eb40a.cfg
+++ b/tcl/board/at91eb40a.cfg
@@ -16,10 +16,9 @@ if { [info exists ENDIAN] } {
    set  _ENDIAN little
 }
 
-if { [info exists CPUTAPID ] } {
+if { [info exists CPUTAPID] } {
    set _CPUTAPID $CPUTAPID
 } else {
-  # force an error till we get a good number
    set _CPUTAPID 0x1f0f0f0f
 }
 
@@ -46,14 +45,14 @@ arm7_9 dcc_downloads enable
 
 #flash driver
 set _FLASHNAME $_CHIPNAME.flash
-flash bank $_FLASHNAME ecosflash 0x01000000 0x200000 2 2 $_TARGETNAME ecos/at91eb40a.elf
+flash bank $_FLASHNAME cfi 0x01000000 0x200000 2 2 $_TARGETNAME
 
 # required for usable performance. Used for lots of
 # other things than flash programming.
 $_TARGETNAME configure -work-area-phys 0x00030000 -work-area-size 0x10000 -work-area-backup 0
 
 $_TARGETNAME configure -event reset-init {
-	puts "Running reset init script for AT91EB40A"
+	echo "Running reset init script for AT91EB40A"
 	# Reset script for AT91EB40a
 	reg cpsr 0x000000D3
 	mww 0xFFE00020 0x1
@@ -65,4 +64,4 @@ $_TARGETNAME configure -event reset-init {
 }
 
 # This target is pretty snappy...
-jtag_khz 16000
+adapter speed 16000