X-Git-Url: https://git.gag.com/?a=blobdiff_plain;f=tcl%2Fboard%2Fat91cap7a-stk-sdram.cfg;h=a0e393f2c9136b58afa60495987b884ce397de84;hb=699a8475a1cdc4a374470f1269106534102db148;hp=95f1d06e2c9c4c9da120f8c18d140ed0bd3a440d;hpb=0f41634d4fc75dd884f2cd14cb4435a7ce7700af;p=fw%2Fopenocd

diff --git a/tcl/board/at91cap7a-stk-sdram.cfg b/tcl/board/at91cap7a-stk-sdram.cfg
index 95f1d06e2..a0e393f2c 100644
--- a/tcl/board/at91cap7a-stk-sdram.cfg
+++ b/tcl/board/at91cap7a-stk-sdram.cfg
@@ -24,11 +24,11 @@ if { [info exists CPUTAPID] } {
 jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
 
 set _TARGETNAME $_CHIPNAME.cpu
-target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm7tdmi
+target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME
 
 $_TARGETNAME configure -event reset-start {
 	# start off real slow when we're running off internal RC oscillator
-	adapter_khz 32
+	adapter speed 32
 }
 
 proc peek32 {address} {
@@ -78,7 +78,7 @@ $_TARGETNAME configure -event reset-init {
 	echo "Master clock ok."
 	
 	# Now that we're up and running, crank up speed!
-	global post_reset_khz ;	adapter_khz $post_reset_khz
+	global post_reset_khz ;	adapter speed $post_reset_khz
 	
 	echo "Configuring the SDRAM controller..."