X-Git-Url: https://git.gag.com/?a=blobdiff_plain;f=tcl%2Fboard%2Faltera_sockit.cfg;h=bbd87d6466d9f2e2585c88f908e28cef4d30f30e;hb=ce5ca9f7ba782ea9fba8ecd5fc1cb9407fd27949;hp=569414331bb86474a960ecdf393d2e5c9e0621b5;hpb=02826721d0b2a40f3802f1b39efb508cf5a95936;p=fw%2Fopenocd

diff --git a/tcl/board/altera_sockit.cfg b/tcl/board/altera_sockit.cfg
index 569414331..bbd87d646 100644
--- a/tcl/board/altera_sockit.cfg
+++ b/tcl/board/altera_sockit.cfg
@@ -1,3 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+
 #
 # Cyclone V SocKit board
 # http://www.altera.com/b/arrow-sockit.html
@@ -7,13 +9,12 @@
 
 # openocd does not currently support the on-board USB Blaster II.
 # Install the JTAG header and use a USB Blaster instead.
-interface usb_blaster
+adapter driver usb_blaster
 
 source [find target/altera_fpgasoc.cfg]
 
 # If the USB Blaster II were supported, these settings would be needed
-#usb_blaster_vid_pid 0x6810 0x09fb
-#usb_blaster_device_desc "USB-Blaster II"
-
-adapter_khz 100
+#usb_blaster vid_pid 0x09fb 0x6810
+#usb_blaster device_desc "USB-Blaster II"
 
+adapter speed 100