X-Git-Url: https://git.gag.com/?a=blobdiff_plain;f=src%2Ftelegps-v0.1%2Fao_pins.h;h=5bea2681b24657ebd160e313c86ffbffab51cb74;hb=d8d3835fedf9b7c4d203f321e72c2b086ebb3b97;hp=46d0b9f2186f5397491666b40da83b45833d20ee;hpb=6fe1e32f5361e901b88b63a30f070e67d460ada1;p=fw%2Faltos

diff --git a/src/telegps-v0.1/ao_pins.h b/src/telegps-v0.1/ao_pins.h
index 46d0b9f2..5bea2681 100644
--- a/src/telegps-v0.1/ao_pins.h
+++ b/src/telegps-v0.1/ao_pins.h
@@ -64,17 +64,25 @@
 #define ao_gps_set_speed	ao_serial2_set_speed
 #define ao_gps_fifo		(ao_stm_usart2.rx_fifo)
 
-#define HAS_EEPROM		0
-#define USE_INTERNAL_FLASH	0
+#define HAS_EEPROM		1
+#define USE_INTERNAL_FLASH	1
 #define HAS_USB			1
 #define HAS_BEEP		0
-#define HAS_RADIO		0
-#define HAS_TELEMETRY		0
+#define HAS_RADIO		1
+#define HAS_TELEMETRY		1
+#define HAS_APRS		1
+#define HAS_RADIO_RECV		0
 
-#define HAS_SPI_1		0
-#define SPI_1_PA5_PA6_PA7	0
+#define HAS_SPI_1		1
+#define SPI_1_PA5_PA6_PA7	1	/* SD card */
 #define SPI_1_PB3_PB4_PB5	0
 #define SPI_1_PE13_PE14_PE15	0
+#define SPI_1_OSPEEDR		STM_OSPEEDR_10MHz
+
+#define SPI_1_PORT		(&stm_gpioa)
+#define SPI_1_SCK_PIN		5
+#define SPI_1_MISO_PIN		6
+#define SPI_1_MOSI_PIN		7
 
 #define HAS_SPI_2		1
 #define SPI_2_PB13_PB14_PB15	1	/* CC115L */
@@ -108,7 +116,7 @@
 
 #define LEDS_AVAILABLE		(AO_LED_RED | AO_LED_GREEN)
 
-#define HAS_GPS			0
+#define HAS_GPS			1
 #define HAS_FLIGHT		0
 #define HAS_ADC			0
 #define HAS_LOG			0
@@ -129,23 +137,46 @@
 
 #define AO_RADIO_CAL_DEFAULT 	0x10b6a5
 
+#define HAS_RADIO_POWER		1
+
 #define AO_FEC_DEBUG		0
 #define AO_CC115L_SPI_CS_PORT	(&stm_gpiob)
 #define AO_CC115L_SPI_CS_PIN	12
 #define AO_CC115L_SPI_BUS	AO_SPI_2_PB13_PB14_PB15
 #define AO_CC115L_SPI		stm_spi2
 
-#define AO_CC115L_INT_PORT	(&stm_gpioa)
-#define AO_CC115L_INT_PIN	(9)
+#define AO_CC115L_FIFO_INT_GPIO_IOCFG	CC115L_IOCFG2
+#define AO_CC115L_FIFO_INT_PORT		(&stm_gpioa)
+#define AO_CC115L_FIFO_INT_PIN		(9)
+
+#define AO_CC115L_DONE_INT_GPIO_IOCFG	CC115L_IOCFG0
+#define AO_CC115L_DONE_INT_PORT		(&stm_gpioa)
+#define AO_CC115L_DONE_INT_PIN		(10)
+
+#define HAS_RADIO_AMP		1
 
-#define AO_CC115L_MCU_WAKEUP_PORT	(&stm_gpioa)
-#define AO_CC115L_MCU_WAKEUP_PIN	(10)
+/*
+ * Power amplifier (RFPA0133)
+ */
 
-#define AO_CC115L_INT_GPIO	2
-#define AO_CC115L_INT_GPIO_IOCFG	CC115L_IOCFG2
+#define AO_PA_POWER_GPIO	(&stm_gpiob)
+#define AO_PA_POWER_PIN		1
+#define AO_PA_GAIN_8_GPIO	(&stm_gpiob)
+#define AO_PA_GAIN_8_PIN	10
+#define AO_PA_GAIN_16_GPIO	(&stm_gpiob)
+#define AO_PA_GAIN_16_PIN	11
 
-#define AO_CC115L_MARC_GPIO	0
-#define AO_CC115L_MARC_GPIO_IOCFG	CC115L_IOCFG0
+/*
+ * SD card
+ */
 
+#define AO_SDCARD_SPI_BUS	AO_SPI_1_PA5_PA6_PA7
+#define AO_SDCARD_SPI_PORT	SPI_1_PORT
+#define AO_SDCARD_SPI_SCK_PIN	SPI_1_SCK_PIN
+#define AO_SDCARD_SPI_MISO_PIN	SPI_1_MISO_PIN
+#define AO_SDCARD_SPI_MOSI_PIN	SPI_1_MOSI_PIN
+#define AO_SDCARD_SPI_CS_PORT	(&stm_gpioa)
+#define AO_SDCARD_SPI_CS_PIN	4
+#define AO_SDCARD_SPI		stm_spi1
 
 #endif /* _AO_PINS_H_ */