X-Git-Url: https://git.gag.com/?a=blobdiff_plain;f=src%2Ftarget%2Fstartup.tcl;h=56fcbaa7516083ddbf4313636ccd7e8d911dd982;hb=d9ba56c295f057e716519a798bf9cdb4898c24f4;hp=d480f335dd0fbc09f7c6d1eff17bcd88378015e0;hpb=cb7dbc1af41068f826246beb53870c01d8973bb8;p=fw%2Fopenocd

diff --git a/src/target/startup.tcl b/src/target/startup.tcl
index d480f335d..56fcbaa75 100644
--- a/src/target/startup.tcl
+++ b/src/target/startup.tcl
@@ -1,21 +1,9 @@
-#########
+# Defines basic Tcl procs for OpenOCD target module
 
-# This reset logic may be overridden by board/target/... scripts as needed
-# to provide a reset that, if possible, is close to a power-up reset.
-#
-# Exit requirements include:  (a) JTAG must be working, (b) the scan
-# chain was validated with "jtag arp_init" (or equivalent), (c) nothing
-# stays in reset.  No TAP-specific scans were performed.  It's OK if
-# some targets haven't been reset yet; they may need TAP-specific scans.
-#
-# The "mode" values include:  halt, init, run (from "reset" command);
-# startup (at OpenOCD server startup, when JTAG may not yet work); and
-# potentially more (for reset types like cold, warm, etc)
-proc init_reset { mode } {
-	jtag arp_init-reset
+proc new_target_name { } {
+	return [target number [expr [target count] - 1 ]]
 }
 
-
 global in_process_reset
 set in_process_reset 0
 
@@ -53,7 +41,7 @@ proc ocd_process_reset_inner { MODE } {
 		set halt 0;
 	}
 	if { $halt < 0 } {
-		return -error "Invalid mode: $MODE, must be one of: halt, init, or run";
+		return -code error "Invalid mode: $MODE, must be one of: halt, init, or run";
 	}
 
 	# Target event handlers *might* change which TAPs are enabled
@@ -76,7 +64,11 @@ proc ocd_process_reset_inner { MODE } {
 	# Examine all targets on enabled taps.
 	foreach t $targets {
 		if {[jtag tapisenabled [$t cget -chain-position]]} {
-			$t arp_examine
+			$t invoke-event examine-start
+			set err [catch "$t arp_examine"]
+			if { $err == 0 } {
+				$t invoke-event examine-end
+			}
 		}
 	}
 
@@ -131,7 +123,7 @@ proc ocd_process_reset_inner { MODE } {
 			set s [$t curstate]
 
 			if { 0 != [string compare $s "halted" ] } {
-				return -error [format "TARGET: %s - Not halted" $t]
+				return -code error [format "TARGET: %s - Not halted" $t]
 			}
 		}
 	}
@@ -163,3 +155,26 @@ proc armv4_5 params {
 	echo "DEPRECATED! use 'arm $params' not 'armv4_5 $params'"
 	arm $params
 }
+
+# Target/chain configuration scripts can either execute commands directly
+# or define a procedure which is executed once all configuration
+# scripts have completed.
+#
+# By default(classic) the config scripts will set up the target configuration
+proc init_targets {} {
+}
+
+# Additionally board config scripts can define a procedure init_board that will be executed after init and init_targets
+proc init_board {} {
+}
+
+# deprecated target name cmds
+proc cortex_m3 args {
+	echo "DEPRECATED! use 'cortex_m' not 'cortex_m3'"
+	eval cortex_m $args
+}
+
+proc cortex_a8 args {
+	echo "DEPRECATED! use 'cortex_a' not 'cortex_a8'"
+	eval cortex_a $args
+}