X-Git-Url: https://git.gag.com/?a=blobdiff_plain;f=src%2Fstm-flash%2Fao_pins.h;h=d6c7265348e317856ff0f474bcaccec66a39e81d;hb=488a527267decece48e6682e0e0c7fc29cbed329;hp=b232f373db699ba37bba2b62b0aa358319fbdd1a;hpb=a6887032b4d217bca5236ea15389218f10d69545;p=fw%2Faltos

diff --git a/src/stm-flash/ao_pins.h b/src/stm-flash/ao_pins.h
index b232f373..d6c72653 100644
--- a/src/stm-flash/ao_pins.h
+++ b/src/stm-flash/ao_pins.h
@@ -20,7 +20,9 @@
 
 #define HAS_TASK_QUEUE		0
 
-#define AO_HSE			8000000
+/* Bridge SB17 on the board and use the MCO from the other chip */
+#define AO_HSE		8000000
+#define AO_HSE_BYPASS		1
 
 /* PLLVCO = 96MHz (so that USB will work) */
 #define AO_PLLMUL		12
@@ -43,15 +45,18 @@
 #define AO_RCC_CFGR_PPRE2_DIV	STM_RCC_CFGR_PPRE2_DIV_1
 
 #define HAS_USB			1
-#define USE_USB_STDIN		1
+#define USE_USB_STDIO		0
 #define HAS_BEEP		0
+#define HAS_TASK		0
+#define HAS_ECHO		0
+#define HAS_TICK		0
 
 #define PACKET_HAS_SLAVE	0
 
 #define LED_PORT_ENABLE		STM_RCC_AHBENR_GPIOCEN
-#define LED_PORT		(&stm_gpioc)
-#define LED_PIN_RED		8
-#define LED_PIN_GREEN		9
+#define LED_PORT		(&stm_gpiob)
+#define LED_PIN_RED		6
+#define LED_PIN_GREEN		7
 #define AO_LED_RED		(1 << LED_PIN_RED)
 #define AO_LED_GREEN		(1 << LED_PIN_GREEN)
 
@@ -61,11 +66,14 @@
 #define AO_TICK_SIGNED		int32_t
 
 #define HAS_TASK_INFO		0
+#define HAS_VERSION		0
 
-#define AO_BOOT_APPLICATION_GPIO	stm_gpiob
-#define AO_BOOT_APPLICATION_PIN		5
-#define AO_BOOT_APPLICATION_VALUE	0
+#define AO_BOOT_CHAIN		1
+#define AO_BOOT_PIN		1
+
+#define AO_BOOT_APPLICATION_GPIO	stm_gpiod
+#define AO_BOOT_APPLICATION_PIN		2
+#define AO_BOOT_APPLICATION_VALUE	1
 #define AO_BOOT_APPLICATION_MODE	AO_EXTI_MODE_PULL_UP
-#define AO_BOOT_APPLICATION_BASE	0x2000
 
 #endif /* _AO_PINS_H_ */