X-Git-Url: https://git.gag.com/?a=blobdiff_plain;f=src%2Fstm-demo%2Fao_pins.h;h=885b9db6f5717834eaa1bc5d1bbe3fb35b08fed5;hb=1530c24cc75cdf9ba87c7e153ff28bf7beb4384c;hp=42f4123d19c1f586bc16463eadc3de1d2bac95f0;hpb=f7cfbbce2b94b5ac0094a0e34e1766fe1ceb12c8;p=fw%2Faltos

diff --git a/src/stm-demo/ao_pins.h b/src/stm-demo/ao_pins.h
index 42f4123d..885b9db6 100644
--- a/src/stm-demo/ao_pins.h
+++ b/src/stm-demo/ao_pins.h
@@ -18,13 +18,37 @@
 #ifndef _AO_PINS_H_
 #define _AO_PINS_H_
 
-#define HAS_SERIAL_1		1
-#define USE_SERIAL_1_STDIN	1
+/* Bridge SB17 on the board and use the MCO from the other chip */
+#define AO_HSE		8000000
+#define AO_HSE_BYPASS		1
+
+/* PLLVCO = 96MHz (so that USB will work) */
+#define AO_PLLMUL		12
+#define AO_RCC_CFGR_PLLMUL	(STM_RCC_CFGR_PLLMUL_12)
+
+/* SYSCLK = 32MHz */
+#define AO_PLLDIV		3
+#define AO_RCC_CFGR_PLLDIV	(STM_RCC_CFGR_PLLDIV_3)
+
+/* HCLK = 32MHZ (CPU clock) */
+#define AO_AHB_PRESCALER	1
+#define AO_RCC_CFGR_HPRE_DIV	STM_RCC_CFGR_HPRE_DIV_1
+
+/* Run APB1 at HCLK/1 */
+#define AO_APB1_PRESCALER	1
+#define AO_RCC_CFGR_PPRE1_DIV	STM_RCC_CFGR_PPRE2_DIV_1
+
+/* Run APB2 at HCLK/1 */
+#define AO_APB2_PRESCALER      	1
+#define AO_RCC_CFGR_PPRE2_DIV	STM_RCC_CFGR_PPRE2_DIV_1
+
+#define HAS_SERIAL_1		0
+#define USE_SERIAL_1_STDIN	0
 #define SERIAL_1_PB6_PB7	1
 #define SERIAL_1_PA9_PA10	0
 
 #define HAS_SERIAL_2		0
-#define USE_SERIAL_2_STDIN	1
+#define USE_SERIAL_2_STDIN	0
 #define SERIAL_2_PA2_PA3	0
 #define SERIAL_2_PD5_PD6	1
 
@@ -36,23 +60,25 @@
 
 #define HAS_SPI_1		1
 #define SPI_1_PB3_PB4_PB5	1
+#define SPI_1_OSPEEDR		STM_OSPEEDR_10MHz
 
 #define HAS_SPI_2		0
 
-#define HAS_USB			0
+#define HAS_USB			1
 #define HAS_BEEP		0
 #define PACKET_HAS_SLAVE	0
 
-#define LOW_LEVEL_DEBUG		1
+#define AO_BOOT_CHAIN		1
+
+#define LOW_LEVEL_DEBUG		0
 
 #define LED_PORT_ENABLE		STM_RCC_AHBENR_GPIOBEN
-#define LED_PORT		stm_gpiob
+#define LED_PORT		(&stm_gpiob)
 #define LED_PIN_GREEN		7
 #define LED_PIN_BLUE		6
 #define AO_LED_GREEN		(1 << LED_PIN_GREEN)
 #define AO_LED_BLUE		(1 << LED_PIN_BLUE)
-
-#define AO_LED_RED		AO_LED_BLUE	/* a patent lie */
+#define AO_LED_PANIC		AO_LED_BLUE
 
 #define LEDS_AVAILABLE		(AO_LED_BLUE | AO_LED_GREEN)
 
@@ -111,6 +137,8 @@
 
 #define AO_LCD_28_ON_C	1
 
+#define AO_LCD_DUTY	STM_LCD_CR_DUTY_STATIC
+
 #define HAS_ADC			1
 
 #define AO_ADC_RING		32
@@ -123,7 +151,7 @@ struct ao_adc {
 };
 
 #define AO_ADC_IDD		4
-#define AO_ADC_PIN0_PORT	stm_gpioa
+#define AO_ADC_PIN0_PORT	(&stm_gpioa)
 #define AO_ADC_PIN0_PIN		4
 
 #define AO_ADC_RCC_AHBENR	((1 << STM_RCC_AHBENR_GPIOAEN))
@@ -132,11 +160,43 @@ struct ao_adc {
 
 #define HAS_ADC_TEMP		1
 
+#define AO_DATA_RING		32
 #define AO_NUM_ADC		3
 
 #define AO_ADC_SQ1		AO_ADC_IDD
 #define AO_ADC_SQ2		AO_ADC_TEMP
 #define AO_ADC_SQ3		AO_ADC_VREF
 	
+#define HAS_I2C_1		1
+#define I2C_1_PB6_PB7		0
+#define I2C_1_PB8_PB9		1
+
+#define HAS_I2C_2		0
+#define I2C_2_PB10_PB11		0
+
+#define AO_EVENT		1
+
+#define AO_QUADRATURE_COUNT	2
+#define AO_QUADRATURE_MODE	AO_EXTI_MODE_PULL_UP
+
+#define AO_QUADRATURE_0_PORT	&stm_gpioc
+#define AO_QUADRATURE_0_A	1
+#define AO_QUADRATURE_0_B	0
+
+#define AO_QUADRATURE_1_PORT	&stm_gpioc
+#define AO_QUADRATURE_1_A	3
+#define AO_QUADRATURE_1_B	2
+
+#define AO_BUTTON_COUNT		2
+#define AO_BUTTON_MODE		AO_EXTI_MODE_PULL_UP
+
+#define AO_BUTTON_0_PORT	&stm_gpioc
+#define AO_BUTTON_0		6
+
+#define AO_BUTTON_1_PORT	&stm_gpioc
+#define AO_BUTTON_1		7
+
+#define AO_TICK_TYPE		uint32_t
+#define AO_TICK_SIGNED		int32_t
 
 #endif /* _AO_PINS_H_ */