X-Git-Url: https://git.gag.com/?a=blobdiff_plain;f=src%2Flpc%2Fao_timer_lpc.c;h=44fb410e7f522b642d1a68f965f46681690a3d74;hb=2fa87754c5c11bb86e9b1878580c3d4f4b2463f5;hp=aa796acf9b0da1f2a7c84486a44e4ff8cfffd6bc;hpb=bcc65597d3d20f1d58df784100af766cee5f0f20;p=fw%2Faltos

diff --git a/src/lpc/ao_timer_lpc.c b/src/lpc/ao_timer_lpc.c
index aa796acf..44fb410e 100644
--- a/src/lpc/ao_timer_lpc.c
+++ b/src/lpc/ao_timer_lpc.c
@@ -61,7 +61,7 @@ ao_timer_set_adc_interval(uint8_t interval)
 }
 #endif
 
-#define SYSTICK_RELOAD ((AO_LPC_CLKOUT / 2) / 100 - 1)
+#define SYSTICK_RELOAD ((AO_LPC_SYSCLK / 2) / 100 - 1)
 
 /* Initialize our 100Hz clock */
 void
@@ -78,6 +78,14 @@ ao_timer_init(void)
 
 #define AO_LPC_FCCO_MIN	156000000
 
+static void
+ao_clock_delay(void)
+{
+	uint32_t	i;
+	for (i = 0; i < 200; i++)
+		ao_arch_nop();
+}
+
 void
 ao_clock_init(void)
 {
@@ -92,13 +100,32 @@ ao_clock_init(void)
 				 (1 << LPC_SCB_SYSAHBCLKCTRL_GPIO) |
 				 (1 << LPC_SCB_SYSAHBCLKCTRL_IOCON));
 				 
+	/* Enable the brown-out detection at the highest voltage to
+	 * make sure the flash part remains happy
+	 */
+
+	lpc_scb.pdruncfg &= ~(1 << LPC_SCB_PDRUNCFG_BOD_PD);
+	lpc_scb.bodctrl = ((LPC_SCB_BOD_BODRSTLEV_2_63 << LPC_SCB_BOD_BODRSTLEV) |
+			   (LPC_SCB_BOD_BODINTVAL_RESERVED << LPC_SCB_BOD_BODINTVAL) |
+			   (1 << LPC_SCB_BOD_BODRSTENA));
+
 	/* Turn the IRC clock back on */
 	lpc_scb.pdruncfg &= ~(1 << LPC_SCB_PDRUNCFG_IRC_PD);
+	ao_clock_delay();
 	
 	/* Switch to the IRC clock */
 	lpc_scb.mainclksel = LPC_SCB_MAINCLKSEL_SEL_IRC << LPC_SCB_MAINCLKSEL_SEL;
 	lpc_scb.mainclkuen = (0 << LPC_SCB_MAINCLKUEN_ENA);
 	lpc_scb.mainclkuen = (1 << LPC_SCB_MAINCLKUEN_ENA);
+	while (!(lpc_scb.mainclkuen & (1 << LPC_SCB_MAINCLKUEN_ENA)))
+		;
+	
+	/* Switch USB to the main clock */
+	lpc_scb.usbclksel = (LPC_SCB_USBCLKSEL_SEL_MAIN_CLOCK << LPC_SCB_USBCLKSEL_SEL);
+	lpc_scb.usbclkuen = (0 << LPC_SCB_USBCLKUEN_ENA);
+	lpc_scb.usbclkuen = (1 << LPC_SCB_USBCLKUEN_ENA);
+	while (!(lpc_scb.usbclkuen & (1 << LPC_SCB_USBCLKUEN_ENA)))
+		;
 	
 	/* Find a PLL post divider ratio that gets the FCCO in range */
 	for (p = 0; p < 4; p++)
@@ -110,14 +137,15 @@ ao_clock_init(void)
 
 	/* Power down the PLL before touching the registers */
 	lpc_scb.pdruncfg |= (1 << LPC_SCB_PDRUNCFG_SYSPLL_PD);
+	ao_clock_delay();
 
 	/* Set PLL divider values */
 	lpc_scb.syspllctrl = ((AO_LPC_M << LPC_SCB_SYSPLLCTRL_MSEL) |
 			      (p << LPC_SCB_SYSPLLCTRL_PSEL));
 
-
 	/* Turn off the external crystal clock */
 	lpc_scb.pdruncfg |= (1 << LPC_SCB_PDRUNCFG_SYSOSC_PD);
+	ao_clock_delay();
 
 	/* Configure the crystal clock */
 	lpc_scb.sysoscctrl = ((0 << LPC_SCB_SYSOSCCTRL_BYPASS) |			   /* using a crystal */
@@ -125,12 +153,16 @@ ao_clock_init(void)
 
 	/* Turn on the external crystal clock */
 	lpc_scb.pdruncfg &= ~(1 << LPC_SCB_PDRUNCFG_SYSOSC_PD);
+	ao_clock_delay();
 
 	/* Select crystal as PLL input */
 
 	lpc_scb.syspllclksel = (LPC_SCB_SYSPLLCLKSEL_SEL_SYSOSC << LPC_SCB_SYSPLLCLKSEL_SEL);
-	lpc_scb.syspllclkuen = 0;
 	lpc_scb.syspllclkuen = (1 << LPC_SCB_SYSPLLCLKUEN_ENA);
+	lpc_scb.syspllclkuen = (0 << LPC_SCB_SYSPLLCLKUEN_ENA);
+	lpc_scb.syspllclkuen = (1 << LPC_SCB_SYSPLLCLKUEN_ENA);
+	while (!(lpc_scb.syspllclkuen & (1 << LPC_SCB_SYSPLLCLKUEN_ENA)))
+		;
 	
 	/* Turn on the PLL */
 	lpc_scb.pdruncfg &= ~(1 << LPC_SCB_PDRUNCFG_SYSPLL_PD);
@@ -145,21 +177,37 @@ ao_clock_init(void)
 
 	/* Switch to the PLL */
 	lpc_scb.mainclksel = LPC_SCB_MAINCLKSEL_SEL_PLL_OUTPUT << LPC_SCB_MAINCLKSEL_SEL;
-	lpc_scb.mainclkuen = 0 << LPC_SCB_MAINCLKUEN_ENA;
-	lpc_scb.mainclkuen = 1 << LPC_SCB_MAINCLKUEN_ENA;
+	lpc_scb.mainclkuen = (1 << LPC_SCB_MAINCLKUEN_ENA);
+	lpc_scb.mainclkuen = (0 << LPC_SCB_MAINCLKUEN_ENA);
+	lpc_scb.mainclkuen = (1 << LPC_SCB_MAINCLKUEN_ENA);
+	while (!(lpc_scb.mainclkuen & (1 << LPC_SCB_MAINCLKUEN_ENA)))
+		;
 
 	/* Set system clock divider */
 	lpc_scb.sysahbclkdiv = AO_LPC_CLKOUT / AO_LPC_SYSCLK;
 
-	/* Set USB clock source */
-	lpc_scb.usbclksel = (LPC_SCB_USBCLKSEL_SEL_MAIN_CLOCK << LPC_SCB_USBCLKSEL_SEL);
-	lpc_scb.usbclkuen = (0 << LPC_SCB_USBCLKUEN_ENA);
-	lpc_scb.usbclkuen = (1 << LPC_SCB_USBCLKUEN_ENA);
-
 	/* Shut down perhipheral clocks (enabled as needed) */
 	lpc_scb.ssp0clkdiv = 0;
 	lpc_scb.uartclkdiv = 0;
 	lpc_scb.ssp1clkdiv = 0;
 	lpc_scb.usbclkdiv = 0;
 	lpc_scb.clkoutdiv = 0;
+
+	/* Switch USB PLL source to system osc so we can power down the IRC */
+	lpc_scb.usbpllclksel = (LPC_SCB_USBPLLCLKSEL_SEL_SYSOSC << LPC_SCB_USBPLLCLKSEL_SEL);
+	lpc_scb.usbpllclkuen = (0 << LPC_SCB_USBPLLCLKUEN_ENA);
+	lpc_scb.usbpllclkuen = (1 << LPC_SCB_USBPLLCLKUEN_ENA);
+	while (!(lpc_scb.usbpllclkuen & (1 << LPC_SCB_USBPLLCLKUEN_ENA)))
+		;
+	
+	/* Power down everything we don't need */
+	lpc_scb.pdruncfg = ((1 << LPC_SCB_PDRUNCFG_IRCOUT_PD) |
+			    (1 << LPC_SCB_PDRUNCFG_IRC_PD) |
+			    (0 << LPC_SCB_PDRUNCFG_BOD_PD) |
+			    (1 << LPC_SCB_PDRUNCFG_ADC_PD) |
+			    (1 << LPC_SCB_PDRUNCFG_WDTOSC_PD) |
+			    (1 << LPC_SCB_PDRUNCFG_USBPLL_PD) |
+			    (1 << LPC_SCB_PDRUNCFG_USBPAD_PD) |
+			    (1 << 11) |
+			    (7 << 13));
 }