X-Git-Url: https://git.gag.com/?a=blobdiff_plain;f=src%2Fjtag%2Fstartup.tcl;h=2ac85715826e3054f6f649cc0539f9de3fe4e653;hb=70babcc00b5f495e4d0dbac9bad88d78592d2779;hp=fdd307815a98e95bb06929cea99692e7f8ce9a78;hpb=ab818f68984aaf56f8b966f4b2e2da4e7f1051c9;p=fw%2Fopenocd

diff --git a/src/jtag/startup.tcl b/src/jtag/startup.tcl
index fdd307815..2ac857158 100644
--- a/src/jtag/startup.tcl
+++ b/src/jtag/startup.tcl
@@ -21,7 +21,9 @@ proc jtag_init {} {
 # startup (at OpenOCD server startup, when JTAG may not yet work); and
 # potentially more (for reset types like cold, warm, etc)
 proc init_reset { mode } {
-	jtag arp_init-reset
+	if {[using_jtag]} {
+		jtag arp_init-reset
+	}
 }
 
 #########
@@ -30,7 +32,7 @@ proc init_reset { mode } {
 # documented nor supported except on ZY1000.
 
 proc power_restore {} {
-	puts "Sensed power restore, running reset init and halting GDB."
+	echo "Sensed power restore, running reset init and halting GDB."
 	reset init
 	
 	# Halt GDB so user can deal with a detected power restore.
@@ -47,7 +49,7 @@ proc power_restore {} {
 add_help_text power_restore "Overridable procedure run when power restore is detected. Runs 'reset init' by default."
 
 proc power_dropout {} {
-	puts "Sensed power dropout."
+	echo "Sensed power dropout."
 }
 
 #########
@@ -56,7 +58,7 @@ proc power_dropout {} {
 # documented nor supported except on ZY1000.
 
 proc srst_deasserted {} {
-	puts "Sensed nSRST deasserted, running reset init and halting GDB."
+	echo "Sensed nSRST deasserted, running reset init and halting GDB."
 	reset init
 
 	# Halt GDB so user can deal with a detected reset.
@@ -73,26 +75,145 @@ proc srst_deasserted {} {
 add_help_text srst_deasserted "Overridable procedure run when srst deassert is detected. Runs 'reset init' by default."
 
 proc srst_asserted {} {
-	puts "Sensed nSRST asserted."
+	echo "Sensed nSRST asserted."
 }
 
 # measure actual JTAG clock
 proc measure_clk {} {
 	set start_time [ms];
-	runtest 10000000; 
-	echo "Running at more than [expr 10000.0 / ([ms]-$start_time)] kHz";
+        set iterations 10000000;
+	runtest $iterations;
+	echo "Running at more than [expr $iterations.0 / ([ms]-$start_time)] kHz";
 }
 
 add_help_text measure_clk "Runs a test to measure the JTAG clk. Useful with RCLK / RTCK."
 
+proc default_to_jtag { f args } {
+	set current_transport [transport select]
+	if {[using_jtag]} {
+		eval $f $args
+	} {
+		error "session transport is \"$current_transport\" but your config requires JTAG"
+	}
+}
+
+proc jtag args {
+	eval default_to_jtag jtag $args
+}
+
+proc jtag_rclk args {
+	eval default_to_jtag jtag_rclk $args
+}
+
+proc jtag_ntrst_delay args {
+	eval default_to_jtag jtag_ntrst_delay $args
+}
+
+proc jtag_ntrst_assert_width args {
+	eval default_to_jtag jtag_ntrst_assert_width $args
+}
+
 # BEGIN MIGRATION AIDS ...  these adapter operations originally had
 # JTAG-specific names despite the fact that the operations were not
 # specific to JTAG, or otherewise had troublesome/misleading names.
 #
 # FIXME phase these aids out after about April 2011
 #
-proc jtag_khz args { eval adapter_khz $args }
-proc jtag_nsrst_delay args { eval adapter_nsrst_delay $args }
-proc jtag_nsrst_assert_width args { eval adapter_nsrst_assert_width $args }
+proc jtag_khz args {
+	echo "DEPRECATED! use 'adapter speed' not 'jtag_khz'"
+	eval adapter speed $args
+}
+
+proc jtag_nsrst_delay args {
+	echo "DEPRECATED! use 'adapter srst delay' not 'jtag_nsrst_delay'"
+	eval adapter srst delay $args
+}
+
+proc jtag_nsrst_assert_width args {
+	echo "DEPRECATED! use 'adapter srst pulse_width' not 'jtag_nsrst_assert_width'"
+	eval adapter srst pulse_width $args
+}
+
+proc jtag_reset args {
+	echo "DEPRECATED! use 'adapter [de]assert' not 'jtag_reset'"
+	switch $args {
+		"0 0"
+			{eval adapter deassert trst deassert srst}
+		"0 1"
+			{eval adapter deassert trst assert srst}
+		"1 0"
+			{eval adapter assert trst deassert srst}
+		"1 1"
+			{eval adapter assert trst assert srst}
+		default
+			{return -code 1 -level 1 "jtag_reset: syntax error"}
+	}
+}
+
+# stlink migration helpers
+proc stlink_device_desc args {
+	echo "DEPRECATED! use 'hla_device_desc' not 'stlink_device_desc'"
+	eval hla_device_desc $args
+}
+
+proc stlink_serial args {
+	echo "DEPRECATED! use 'hla_serial' not 'stlink_serial'"
+	eval hla_serial $args
+}
+
+proc stlink_layout args {
+	echo "DEPRECATED! use 'hla_layout' not 'stlink_layout'"
+	eval hla_layout $args
+}
+
+proc stlink_vid_pid args {
+	echo "DEPRECATED! use 'hla_vid_pid' not 'stlink_vid_pid'"
+	eval hla_vid_pid $args
+}
+
+proc stlink args {
+	echo "DEPRECATED! use 'hla' not 'stlink'"
+	eval hla $args
+}
+
+proc adapter_khz args {
+	echo "DEPRECATED! use 'adapter speed' not 'adapter_khz'"
+	eval adapter speed $args
+}
+
+proc adapter_name args {
+	echo "DEPRECATED! use 'adapter name' not 'adapter_name'"
+	eval adapter name $args
+}
+
+proc adapter_nsrst_delay args {
+	echo "DEPRECATED! use 'adapter srst delay' not 'adapter_nsrst_delay'"
+	eval adapter srst delay $args
+}
+
+proc adapter_nsrst_assert_width args {
+	echo "DEPRECATED! use 'adapter srst pulse_width' not 'adapter_nsrst_assert_width'"
+	eval adapter srst pulse_width $args
+}
+
+proc interface args {
+	echo "DEPRECATED! use 'adapter driver' not 'interface'"
+	eval adapter driver $args
+}
+
+proc  interface_transports args {
+	echo "DEPRECATED! use 'adapter transports' not 'interface_transports'"
+	eval adapter transports $args
+}
+
+proc  interface_list args {
+	echo "DEPRECATED! use 'adapter list' not 'interface_list'"
+	eval adapter list $args
+}
+
+proc ftdi_location args {
+	echo "DEPRECATED! use 'adapter usb location' not 'ftdi_location'"
+	eval adapter usb location $args
+}
 
 # END MIGRATION AIDS