X-Git-Url: https://git.gag.com/?a=blobdiff_plain;f=src%2Fhelper%2Fstartup.tcl;h=41137f1adb204a46f48afd782b59340c24c19f85;hb=59ff8d24d84ad734ca470aa37e9516be806499c9;hp=63956a9ef46f237471deb2ed6f2d2d8ba8d09dfc;hpb=ef1cfb23947bd32798077c6abb5c25a049460ae9;p=fw%2Fopenocd

diff --git a/src/helper/startup.tcl b/src/helper/startup.tcl
index 63956a9ef..41137f1ad 100644
--- a/src/helper/startup.tcl
+++ b/src/helper/startup.tcl
@@ -21,19 +21,6 @@ proc get_help_text {} {
 	return $ocd_helptext
 }
 
-# Production command
-# FIX!!! need to figure out how to feed back relevant output
-# from e.g. "flash banks" command...
-proc board_produce {filename serialnumber} {
-	openocd "reset init"
-	openocd "flash write_image erase $filename [flash] bin"]]
-	openocd "verify_image $filename [flash] bin"]]
-	echo "Successfully ran production procedure"
-}
-
-proc board_test {} {
-	echo "Production test not implemented"
-}
 
 # Show flash in human readable form
 # This is an example of a human readable form of a low level fn
@@ -110,53 +97,21 @@ proc unknown {args} {
 }
 
 proc new_target_name { } {
-    return [target number [expr [target count] - 1 ]]
+	return [target number [expr [target count] - 1 ]]
 }
 
-
-proc target_script {target_num eventname scriptname} {
-
-    set tname [target number $target_num]
-    
-    if { 0 == [string compare $eventname "reset"] } {
-	$tname configure -event old-post_reset "script $scriptname"
-	return
-    }
-
-    if { 0 == [string compare $eventname "post_reset"] } {
-	$tname configure -event old-post_reset "script $scriptname"
-	return
-    }
-
-    if { 0 == [string compare $eventname "pre_reset"] } {
-	$tname configure -event old-pre_reset "script $scriptname"
-	return
-    }
-
-    if { 0 == [string compare $eventname "gdb_program_config"] } {
-	$tname configure -event old-gdb_program_config "script $scriptname"
-	return
-    }
-
-    return -code error "Unknown target (old) event: $eventname (try $tname configure -event NAME)"
-
-}
-
-add_help_text target_script "DEPRECATED please see the new TARGETNAME configure -event interface"
-
-
 # Try flipping / and \ to find file if the filename does not
 # match the precise spelling
 proc find {filename} {
 	if {[catch {ocd_find $filename} t]==0} {
 		return $t
-	}  
+	}
 	if {[catch {ocd_find [string map {\ /} $filename} t]==0} {
 		return $t
-	}  
+	}
 	if {[catch {ocd_find [string map {/ \\} $filename} t]==0} {
 		return $t
-	}  
+	}
 	# make sure error message matches original input string
 	return -code error "Can't find $filename"
 }
@@ -173,8 +128,6 @@ proc script {filename} {
 
 add_help_text script "<filename> - filename of OpenOCD script (tcl) to run"
 
-
-
 # Handle GDB 'R' packet. Can be overriden by configuration script,
 # but it's not something one would expect target scripts to do
 # normally
@@ -184,7 +137,6 @@ proc ocd_gdb_restart {target_num} {
 	reset halt
 }
 
-
 # If RCLK is not supported, use fallback_speed_khz
 proc jtag_rclk {fallback_speed_khz} {
 	if {[catch {jtag_khz 0}]!=0} {
@@ -193,3 +145,161 @@ proc jtag_rclk {fallback_speed_khz} {
 }
 
 add_help_text jtag_rclk "fallback_speed_khz - set JTAG speed to RCLK or use fallback speed"
+
+proc ocd_process_reset { MODE } {
+
+	# If this target must be halted...
+	set halt -1
+	if { 0 == [string compare $MODE halt] } {
+		set halt 1
+	}
+	if { 0 == [string compare $MODE init] } {
+		set halt 1;
+	}
+	if { 0 == [string compare $MODE run ] } {
+		set halt 0;
+	}
+	if { $halt < 0 } {
+		return -error "Invalid mode: $MODE, must be one of: halt, init, or run";
+	}
+
+	foreach t [ target names ] {
+		# New event script.
+		$t invoke-event reset-start
+	}
+
+	# Init the tap controller.
+	jtag arp_init-reset
+
+	# Examine all targets.
+	foreach t [ target names ] {
+		$t arp_examine
+	}
+
+	# Let the C code know we are asserting reset.
+	foreach t [ target names ] {
+		$t invoke-event reset-assert-pre
+		# C code needs to know if we expect to 'halt'
+		$t arp_reset assert $halt
+		$t invoke-event reset-assert-post
+	}
+
+	# Now de-assert reset.
+	foreach t [ target names ] {
+		$t invoke-event reset-deassert-pre
+		# Again, de-assert code needs to know..
+		$t arp_reset deassert $halt
+		$t invoke-event reset-deassert-post
+	}
+
+	# Pass 1 - Now try to halt.
+	if { $halt } {
+		foreach t [target names] {
+	
+			# Wait upto 1 second for target to halt.  Why 1sec? Cause
+			# the JTAG tap reset signal might be hooked to a slow
+			# resistor/capacitor circuit - and it might take a while
+			# to charge
+			
+			# Catch, but ignore any errors.
+			catch { $t arp_waitstate halted 1000 }
+			
+			# Did we succeed?
+			set s [$t curstate]
+			
+			if { 0 != [string compare $s "halted" ] } {
+				return -error [format "TARGET: %s - Not halted" $t]
+			}
+		}
+	}
+
+	#Pass 2 - if needed "init"
+	if { 0 == [string compare init $MODE] } {
+		foreach t [target names] {
+			set err [catch "$t arp_waitstate halted 5000"]
+			# Did it halt?
+			if { $err == 0 } {
+				$t invoke-event reset-init		
+			}
+		}
+	}
+
+	foreach t [ target names ] {
+		$t invoke-event reset-end
+	}
+}
+
+# stubs for targets scripts that do not have production procedure
+proc production_info {} {
+	return "Imagine an explanation here..."
+}
+add_help_text production_info "Displays information on production procedure for target script. Implement this procedure in target script."
+
+proc production {firmwarefile serialnumber} {
+	puts "Imagine production procedure running successfully. Programmed $firmwarefile with serial number $serialnumber"
+}
+
+add_help_text production "<serialnumber> - Runs production procedure. Throws exception if procedure failed. Prints progress messages. Implement this procedure in the target script."
+
+proc production_test {} {
+	puts "Imagine nifty test procedure having run to completion here."
+}
+add_help_text production "Runs test procedure. Throws exception if procedure failed. Prints progress messages. Implement in target script."
+
+add_help_text cpu "<name> - prints out target options and a comment on CPU which matches name"
+
+# A list of names of CPU and options required
+set ocd_cpu_list {
+	{
+		name IXP42x 
+		options {xscale -variant IXP42x} 
+		comment {IXP42x cpu}
+	}
+	{
+		name arm7 
+		options {arm7tdmi -variant arm7tdmi} 
+		comment {vanilla ARM7}
+	}
+}
+
+# Invoked from Tcl code
+proc ocd_cpu {args} {
+	set name $args
+	set result ""
+	global ocd_cpu_list
+	foreach a [lsort $ocd_cpu_list] {
+		if {[string length $args]==0||[string first [string toupper $name] [string toupper "$a(name)$a(options)$a(comment)"]]!=-1} {
+			lappend result $a 
+		}
+	}
+	return $result
+}
+
+proc cpu {args} {
+    #     0123456789012345678901234567890123456789012345678901234567890123456789
+	puts "CPU                 Options                                 Comment"
+	foreach a [lsort [ocd_cpu $args]] {
+		puts [format "%-20s%-40s%s" $a(name) $a(options) $a(comment)]
+	}
+}
+
+proc power_restore {} {
+	puts "Sensed power restore."
+	reset init
+}
+
+add_help_text power_restore "Overridable procedure run when power restore is detected. Runs 'reset init' by default."
+
+proc power_dropout {} {
+	puts "Sensed power dropout."
+}
+
+proc srst_deasserted {} {
+	puts "Sensed nSRST deasserted."
+	reset init
+}
+add_help_text srst_deasserted "Overridable procedure run when srst deassert is detected. Runs 'reset init' by default."
+
+proc srst_asserted {} {
+	puts "Sensed nSRST asserted."
+}