X-Git-Url: https://git.gag.com/?a=blobdiff_plain;f=src%2Fflash%2Fnor%2Fcore.h;h=726dd957ececc37802d2f072d793aee3654d63fe;hb=934ed07b0d05448a553d19daa14ad6196fc0c0fe;hp=0c6a804fc3df01480131e11d18e995632cfe6a89;hpb=c65d94f7d0e0c511794ea1f42ddf01e66f97e236;p=fw%2Fopenocd diff --git a/src/flash/nor/core.h b/src/flash/nor/core.h index 0c6a804fc..726dd957e 100644 --- a/src/flash/nor/core.h +++ b/src/flash/nor/core.h @@ -1,5 +1,9 @@ /*************************************************************************** + * Copyright (C) 2005 by Dominic Rath * + * Copyright (C) 2007,2008 Øyvind Harboe * + * Copyright (C) 2008 by Spencer Oliver * * Copyright (C) 2009 Zachary T Welch * + * Copyright (C) 2010 by Antonio Borneo * * * * This program is free software; you can redistribute it and/or modify * * it under the terms of the GNU General Public License as published by * @@ -14,18 +18,194 @@ * You should have received a copy of the GNU General Public License * * along with this program; if not, write to the * * Free Software Foundation, Inc., * - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. * ***************************************************************************/ + #ifndef FLASH_NOR_CORE_H #define FLASH_NOR_CORE_H -#include +#include + +/** + * @file + * Upper level NOR flash interfaces. + */ + +struct image; + +#define FLASH_MAX_ERROR_STR (128) + +/** + * Describes the geometry and status of a single flash sector + * within a flash bank. A single bank typically consists of multiple + * sectors, each of which can be erased and protected independently. + */ +struct flash_sector { + /** Bus offset from start of the flash chip (in bytes). */ + uint32_t offset; + /** Number of bytes in this flash sector. */ + uint32_t size; + /** + * Indication of erasure status: 0 = not erased, 1 = erased, + * other = unknown. Set by @c flash_driver_s::erase_check. + */ + int is_erased; + /** + * Indication of protection status: 0 = unprotected/unlocked, + * 1 = protected/locked, other = unknown. Set by + * @c flash_driver_s::protect_check. + * + * This information must be considered stale immediately. + * A million things could make it stale: power cycle, + * reset of target, code running on target, etc. + */ + int is_protected; +}; + +/** + * Provides details of a flash bank, available either on-chip or through + * a major interface. + * + * This structure will be passed as a parameter to the callbacks in the + * flash_driver_s structure, some of which may modify the contents of + * this structure of the area of flash that it defines. Driver writers + * may use the @c driver_priv member to store additional data on a + * per-bank basis, if required. + */ +struct flash_bank { + const char *name; + + struct target *target; /**< Target to which this bank belongs. */ + + struct flash_driver *driver; /**< Driver for this bank. */ + void *driver_priv; /**< Private driver storage pointer */ + + int bank_number; /**< The 'bank' (or chip number) of this instance. */ + uint32_t base; /**< The base address of this bank */ + uint32_t size; /**< The size of this chip bank, in bytes */ + + int chip_width; /**< Width of the chip in bytes (1,2,4 bytes) */ + int bus_width; /**< Maximum bus width, in bytes (1,2,4 bytes) */ + + /** Default padded value used, normally this matches the flash + * erased value. Defaults to 0xFF. */ + uint8_t default_padded_value; + + /** + * The number of sectors on this chip. This value will + * be set intially to 0, and the flash driver must set this to + * some non-zero value during "probe()" or "auto_probe()". + */ + int num_sectors; + /** Array of sectors, allocated and initilized by the flash driver */ + struct flash_sector *sectors; + + struct flash_bank *next; /**< The next flash bank on this chip */ +}; + +/** Registers the 'flash' subsystem commands */ +int flash_register_commands(struct command_context *cmd_ctx); + +/** + * Erases @a length bytes in the @a target flash, starting at @a addr. + * The range @a addr to @a addr + @a length - 1 must be strictly + * sector aligned, unless @a pad is true. Setting @a pad true extends + * the range, at beginning and/or end, if needed for sector alignment. + * @returns ERROR_OK if successful; otherwise, an error code. + */ +int flash_erase_address_range(struct target *target, + bool pad, uint32_t addr, uint32_t length); + +int flash_unlock_address_range(struct target *target, uint32_t addr, + uint32_t length); + +/** + * Writes @a image into the @a target flash. The @a written parameter + * will contain the + * @param target The target with the flash to be programmed. + * @param image The image that will be programmed to flash. + * @param written On return, contains the number of bytes written. + * @param erase If non-zero, indicates the flash driver should first + * erase the corresponding banks or sectors before programming. + * @returns ERROR_OK if successful; otherwise, an error code. + */ +int flash_write(struct target *target, + struct image *image, uint32_t *written, int erase); + +/** + * Forces targets to re-examine their erase/protection state. + * This routine must be called when the system may modify the status. + */ +void flash_set_dirty(void); +/** @returns The number of flash banks currently defined. */ +int flash_get_bank_count(void); +/** + * Provides default read implementation for flash memory. + * @param bank The bank to read. + * @param buffer The data bytes read. + * @param offset The offset into the chip to read. + * @param count The number of bytes to read. + * @returns ERROR_OK if successful; otherwise, an error code. + */ +int default_flash_read(struct flash_bank *bank, + uint8_t *buffer, uint32_t offset, uint32_t count); +/** + * Provides default erased-bank check handling. Checks to see if + * the flash driver knows they are erased; if things look uncertain, + * this routine will call default_flash_mem_blank_check() to confirm. + * @returns ERROR_OK if successful; otherwise, an error code. + */ +int default_flash_blank_check(struct flash_bank *bank); /** - * Find a NOR flash driver by its name. - * @param name The name of the requested driver. - * @returns The flash_driver called @c name, or NULL if not found. + * Returns the flash bank specified by @a name, which matches the + * driver name and a suffix (option) specify the driver-specific + * bank number. The suffix consists of the '.' and the driver-specific + * bank number: when two str9x banks are defined, then 'str9x.1' refers + * to the second. + */ +int get_flash_bank_by_name(const char *name, struct flash_bank **bank_result); +/** + * Returns the flash bank specified by @a name, which matches the + * driver name and a suffix (option) specify the driver-specific + * bank number. The suffix consists of the '.' and the driver-specific + * bank number: when two str9x banks are defined, then 'str9x.1' refers + * to the second. + */ +struct flash_bank *get_flash_bank_by_name_noprobe(const char *name); +/** + * Returns the flash bank like get_flash_bank_by_name(), without probing. + * @param num The flash bank number. + * @param bank returned bank if fn returns ERROR_OK + * @returns ERROR_OK if successful + */ +int get_flash_bank_by_num(int num, struct flash_bank **bank); +/** + * Retreives @a bank from a command argument, reporting errors parsing + * the bank identifier or retreiving the specified bank. The bank + * may be identified by its bank number or by @c name.instance, where + * @a instance is driver-specific. + * @param name_index The index to the string in args containing the + * bank identifier. + * @param bank On output, contians a pointer to the bank or NULL. + * @returns ERROR_OK on success, or an error indicating the problem. + */ +COMMAND_HELPER(flash_command_get_bank, unsigned name_index, + struct flash_bank **bank); +/** + * Returns the flash bank like get_flash_bank_by_num(), without probing. + * @param num The flash bank number. + * @returns A struct flash_bank for flash bank @a num, or NULL. + */ +struct flash_bank *get_flash_bank_by_num_noprobe(int num); +/** + * Returns the flash bank located at a specified address. + * @param target The target, presumed to contain one or more banks. + * @param addr An address that is within the range of the bank. + * @param check return ERROR_OK and result_bank NULL if the bank does not exist + * @returns The struct flash_bank located at @a addr, or NULL. */ -struct flash_driver *flash_driver_find_by_name(const char *name); +int get_flash_bank_by_addr(struct target *target, uint32_t addr, bool check, + struct flash_bank **result_bank); -#endif // FLASH_NOR_CORE_H +#endif /* FLASH_NOR_CORE_H */